Panasonic SC-AK350 User Manual

RQT8043

RQTV0199

LANG - 5

LANG - 4

FRANÇAIS

DANSK

ENGLISH

To activate the timer

Press and hold [–

˚PLAY/REC] to turn on your desired

timer.

˚ PLAY

no display (off)

˚ REC

➞

Press [

y] to turn off the unit.

The unit must be off for the timers to operate.

Other basic operations

Action

change the
settings

Repeat steps 1 to 4 and 6 (

see page 13 and

above).

change the
source or
volume

1) Press and hold [–

˚PLAY/REC] to clear the

timer indicator from the display.

2) Make changes to the source or volume.
3) Perform steps 5 to 6 (

see above).

check the
settings

Press [CLOCK/TIMER] repeatedly to select

˚PLAY or ˚REC.

cancel

Press and hold [–

˚PLAY/REC] to clear the

timer indicators from the display.

If you use the unit after the timers are set
After using, check that the correct tape/disc are loaded
before turning the unit off.

Note:

• The play timer will start at the preset time with volume increasing

gradually to preset level.

• The record timer will start 30 seconds before the set time with the

volume muted.

•  The timer comes on at the set time everyday if the timer is on.
•  The unit must be in the standby mode for the timer to function.
•  If you turn the unit off and on again while a timer is functioning,

the fi nish time setting will not be activated.

• If MUSIC PORT is selected as the source when the timer comes

on, the system turns on and engages MUSIC PORT as the
source. If you wish to playback or record from the portable audio
equipment, just activate the equipment’s play mode and increase
the volume. (See the portable audio equipment’s instruction
manual.)

Using the sleep timer

This function enables you to turn off the unit automatically
after the set time.

Press [SLEEP] to select your desired time.

SLEEP 30

SLEEP 60

SLEEP 90

SLEEP OFF

SLEEP 120

Sleep timer indicator

To cancel
Press [SLEEP] to select “SLEEP OFF”.

Changing the remaining time
Press [SLEEP] to show the remaining time and press
[SLEEP] again to select your desired time.

Note:

• The play and sleep timer or the record and sleep timer can be

used together.

• The sleep timer always has priority. Be sure not to overlap timer

settings.

• The sleep timer turns off when you perform the record function.

Timer (continued)

Selecting sound effects

Preset EQ

Press [PRESET EQ] repeatedly to select your desired
setting.

➞

HEAVY

SOFT

CLEAR

➞

VOCAL

➞

FLAT (off)

HALL

LIVE

➞

DISCO

➞

Setting

Effect

HEAVY

Adds punch to rock

SOFT

For background music

CLEAR

Clarifi es higher frequencies

VOCAL

Adds gloss to vocal

DISCO

Produces sound with the same kind of lengthy
reverberations heard at a disco

LIVE

Makes vocals more alive

HALL

Adds an expansiveness to the sound to produce
the atmosphere of a great concert hall

FLAT

No effect

Manual EQ

MANUAL

Press [MANUAL EQ] repeatedly to select your desired
setting.

➞

BASS

MID

TREBLE

➞

Setting

Effect

BASS

For lower pitch sound

MID

For middle pitch sound

TREBLE

For higher pitch sound

Press [

4, / REW ] or [¢, / FF] to adjust the

level.

Press [+] or [–] on the main unit to adjust the level.

Note:

• The level of the pitch is between -3 to +3.
• The changes you make are stored and automatically recalled the

next time you select “MANUAL EQ”.

• By main unit only

AK450

Press and hold [MANUAL EQ] to turn on or off the LED fl ashing.

HARD

BASS

Enhancing the bass sound

You can enhance low-frequency sound so that heavy bass
sound can be heard clearly, even if the acoustics of your
room are not optimal.

To activate
Press [HARD BASS].

To cancel
Press [HARD BASS] again.

Note:

The actual effect depends on the disc.

Sound adjustment

RQTV0199-M_1EN.indd 14

2/9/07 2:22:58 PM