Panasonic sc-hdx3 User Manual
4
Speaker set-up
Position the speakers
30
°
30
°
120
°
a
b
c
d
e
f
¡
Set the speakers up on an even surface to prevent them from
falling. Take proper precautions to prevent the speakers from
falling if you cannot set them up on an even surface.
falling. Take proper precautions to prevent the speakers from
falling if you cannot set them up on an even surface.
¡
Keep your speakers at least 10 mm away from the system for
proper ventilation.
proper ventilation.
¡
Vibration may cause distortion in the picture if the speaker is
placed directly on the television. Use a rack or shelf for the center
speaker.
placed directly on the television. Use a rack or shelf for the center
speaker.
Note
If irregular colouring occurs on your television
These speakers are designed to be used close to a television,
but the picture may be affected with some televisions and set-up
combinations.
If this occur, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.
These speakers are designed to be used close to a television,
but the picture may be affected with some televisions and set-up
combinations.
If this occur, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.
a
Center speaker (included)
b
Front speaker (left) (not included)
c
Front speaker (right) (not included)
d
Surround speaker (left) (included)
e
Surround speaker (right) (included)
f
Subwoofer (not included)
The front, center, and surround speakers should be placed at
approximately the same distance from the listening position.
approximately the same distance from the listening position.
,,
,,
,,
,,
,,
,
,
,
,
,
,,,
,,,
,,,
30-35 mm
ø
7.5-9.5
7-9 mm
Attach the rubber feet to the speaker
Turn the logo so
it is horizontal.
it is horizontal.
Attach these rubber feet to prevent vibration causing the speakers to move or fall over.
(See below if you would prefer to hang the speakers on the wall.)
(See below if you would prefer to hang the speakers on the wall.)
Standing
Lying down
Rubber feet
(4 per speaker,
included)
(4 per speaker,
included)
Rubber feet
(4 per speaker,
included)
(4 per speaker,
included)
Rubber feet
(included)
(included)
Metal wall mounts
(2 sper speaker, included)
(2 sper speaker, included)
Rubber feet (included)
Cloth
Cloth
Attaching the surround speakers to the wall
Screws
(4 per speaker,
included)
(4 per speaker,
included)
Screws
(not included)
(not included)
267 mm
271 mm
To attach horizonatally
To attach vertically
The surface you attach the speakers to must be able to support over 13 k
g
.
Note
The three speakers are the same. How you connect and place them determines whether they are center or surround speakers
Caution
¡
¡
Use the speakers only with the recommended
system. Failure to do so may lead to damage
to the amplifier and/or the speakers, and may
result in the risk of fire. Consult a qualified
service person if damage has occurred or if
you experience a sudden change in
performance.
system. Failure to do so may lead to damage
to the amplifier and/or the speakers, and may
result in the risk of fire. Consult a qualified
service person if damage has occurred or if
you experience a sudden change in
performance.
¡
¡
Do not attempt to attach these speakers to
walls using methods other than those
described in this manual.
walls using methods other than those
described in this manual.