Panasonic SC-HC38 User Manual

RQT9742

By using the Bluetooth

®

 connection, you can listen to the sound from the Bluetooth

®

 audio device from this 

unit wirelessly.

Preparation
≥ Turn on the Bluetooth

®

 feature of the device and 

place the device near this unit.

≥ If this unit is already connected to a Bluetooth

®

 

device, disconnect it.

Press [ ] to select “BLUETOOTH”.

≥ If “PAIRING” is indicated on the display, go to step 3.

Press [PLAY MENU] to select “NEW DEV.” and 
then press [OK].

{.

“PAIRING” is indicated on the display.

Select “SC-HC38” from the Bluetooth

®

 device’s 

Bluetooth

®

 menu.

Start play on the Bluetooth

®

 device.

≥ Refer to the operating instructions of the Bluetooth

®

 

device for details.
If prompted for the passkey, input “0000”.

≥ You can register up to 8 devices with this unit. If a 9th 

device is paired, the device that has not been used for 
the longest time will be replaced.

Preparation
≥ Turn on the Bluetooth

®

 feature of the device and 

place the device near this unit.

≥ If this unit is already connected to a Bluetooth

®

 

device, disconnect it.

Press [ ] to select “BLUETOOTH”.

{.

“READY” is indicated on the display.

Select “SC-HC38” from the Bluetooth

®

 device’s 

Bluetooth

®

 menu.

{.

The name of the connected device is indicated on 
the display for 2 seconds.

Start play on the Bluetooth

®

 device.

≥ This unit can only be connected to one device at a time.
≥ When “BLUETOOTH” is selected as the source, this unit 

will automatically try and connect to the last connected 
Bluetooth

®

 device. The Bluetooth

®

 device will be 

disconnected if a different audio source (e.g., [CD]) is 
selected.

You can change the transmission speed to prioritize 
transmission quality or sound quality.
Preparation
≥ Press [ ] to select “BLUETOOTH”.
≥ If a Bluetooth

®

 device is already connected, 

disconnect it.

Press [PLAY MENU] repeatedly to select 
“LINK MODE”.

Press [3, 4] to select the mode and then 
press [OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality

≥ The default setting is “MODE 1”.

If the sound input level of the Bluetooth

®

 

transmission is too low, change the input level 
setting.
Preparation
≥ Connect a Bluetooth

®

 device.

Press [PLAY MENU] repeatedly to select 
“INPUT LEVEL”.

Press [3, 4] to select the level and then press 
[OK].
“LEVEL 0” 

,.

 “LEVEL i1” 

,.

 “LEVEL i2”

^---------------------------------------------------------------J

≥ Select “LEVEL 0” if the sound is distorted.
≥ The default setting is “LEVEL 0”.

While a Bluetooth

®

 device is connected:

Press [PLAY MENU] to select 
“DISCONNECT?”.

Press [3, 4] to select “OK? YES” and then 
press [OK].

SC-HC38~RQT9742.book  Page 7  Tuesday, December 11, 2012  2:20 PM