Panasonic sc-pm4 User Manual

Page of 12
RQTV021
1
3
Placement of speakers
Speakers are designed identically so that no left or right 
channel orientation is necessary.
Use only the supplied speakers.
The combination of the main unit and speakers provide the 
best sound. Using other speakers can damage the unit and 
sound quality will be negatively affected.
Note
• Keep your speakers at least 10 mm away from the system for 
proper ventilation.
• These speakers do not have magnetic shielding. Do not place 
them near televisions, personal computers or other devices easily 
infl uenced by magnetism.
•  You cannot take the front net off the speakers.
Caution
• Use the speakers only with the recommended 
system. Failure to do so can damage the amplifi er 
and speakers, and can cause fi re. Consult a qualifi ed 
service person if damage occurs or if a sudden 
change in performance is apparent.
•  Do not attach these speakers to walls or ceilings.
Caution for AC Mains Lead
(For United Kingdom)
(“EB” area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your 
safety and convenience.
A 5-ampere fuse is fi tted in this plug.
Should the fuse need to be replaced please ensure that the replacement 
fuse has a rating of 5-ampere and that it is approved by ASTA or BSI 
to BS1362.
Check for the ASTA mark 
m or the BSI mark o on the body of the 
fuse.
If the plug contains a removable fuse cover you must ensure that it is 
refi tted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement 
cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUI T ABLE FOR THE 
SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD 
BE RE MOVED AND THE PLUG CUT OFF AND DIS POSED OF 
SAFELY.
THERE IS A DANGER OF SEVERE ELECTRI CAL SHOCK IF THE 
CUT OFF PLUG IS IN SERTED INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fi tted please observe the wiring code as stated 
below.
If in any doubt please consult a qualifi ed electrician.
IMPORTANT
The wires in this mains lead are coloured in accor dance with the 
following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings 
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal which 
is marked with the letter N or col oured Black or Blue.
The wire which is coloured Brown must be connected to the terminal 
which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH 
TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH 
SYMBOL 
n OR COLOURED GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug 
(fi gures A and B). Confi rm the AC mains plug fi tted and follow the 
instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Fuse cover
Figure A
Figure B
2. Replace the fuse and close or attach the fuse cover.
Fuse
(5 ampere)
Fuse
(5 ampere)
Figure A
Figure B
Inserting batteries into the remote 
control
 Batteries
•  Insert so the poles (+ and –) match those in the remote 
control.
•  Remove if the remote control is not going to be used for a 
long period of time. Store in a cool, dark place.
•  Do not use rechargeable type batteries.
•  Do not heat or expose to fl ame.
•  Mishandling of batteries in the remote control can cause 
electrolyte leakage, which may cause a fi re.
 Use
Aim at the remote control sensor, avoiding obstacles, at a 
maximum range of 7 m directly in front of the unit.
Refer to page 5 for remote control signal sensor position.
PM4_EB_En.indd   3
PM4_EB_En.indd   3
1/31/07   2:41:28 PM
1/31/07   2:41:28 PM