Garmin GPSMAP 76CSx User Manual

GPSMAP 76CSx Owner’s Manual

ETTING

TARTED

NIT

VERVIEW

Installing the Batteries, MicroSD Card,

and Lanyard

The GPSMAP 76CSx operates on two AA batteries

(not included), which are located in the back of the

unit. You can use Alkaline or NiMH batteries. See

To install the batteries:

1. Remove the battery cover

by turning the D-Ring 1/4

turn counter-clockwise and

pulling the cover loose.

2. Insert the batteries,

observing the proper

polarity. A polarity diagram

is molded into the battery

compartment.

3. Reinstall the battery cover

by aligning the back

cover with the unit and

turning the D-Ring 1/4 turn

clockwise.

Remove the batteries from your GPSMAP 76CSx

when you do not expect to use the unit for several

months. Stored data is not lost when batteries are

removed.

To install and uninstall the MicroSD card:

1. Remove the battery cover by turning the D-

Ring 1/4 turn counter-clockwise and pulling the

cover loose.

2. Press down on the top

edge of the MicroSD card

until you hear a click.

Gently release the card.

3. Press down again to

install the card.

To install the Lanyard:

1. Place the loop of the

Lanyard through the slot

at the bottom of the unit.

2 Route the strap through

the loop and pull tight.