Panasonic sc-pm32db User Manual
RQTV0123
11
Cassette tape (
PM33DB
only)
CLEAR
Top of unit
Basic play
Basic play
1
Press [
0] on top of the unit. Insert the cassette.
"
Insert inside the
guides
guides
Forward side
2
Close the lid by hand.
3
Press [TAPE
3]
to start play.
To play the other side of the cassette, turn the cassette over.
To
Action
stop tape playback
Press [
7 ].
start one-touch play
Press [TAPE
3] when the unit is OFF with
the cassette loaded.
fast-forward and
rewind
rewind
Press [ /REW/
4] or [ /FF/¢] in the
stop mode.
Note
• Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
• Endless tapes can get caught up in the deck’s moving parts if used
incorrectly.
TPS (Tape Program Sensor)
TPS (Tape Program Sensor)
This function enables you to search the beginning of a track,
up to a maximum of 9.
up to a maximum of 9.
Press [ /REW/
4] or [ /FF/¢] during play.
Play resumes from the track found.
Note
TPS may not function properly:
• with short silent parts
• when noise occurs between tunes
• if silent parts are found within tunes
• with short silent parts
• when noise occurs between tunes
• if silent parts are found within tunes
Recording
Recording
Use normal position tapes.
High position and metal position tapes can be used, but this
unit will not be able to record or erase them correctly.
High position and metal position tapes can be used, but this
unit will not be able to record or erase them correctly.
Preparation
Wind the leader tape so that recording can begin
immediately.
Wind the leader tape so that recording can begin
immediately.
Recording the radio
Recording the radio
1
Insert the cassette to be recorded.
2
Tune to the required station (refer to page 12).
3
Press [
¶ REC/
8
] to start recording.
Recording discs
Recording discs
1
Insert the cassette to be recorded.
2
Press [
0] to insert the disc. Press again to close.
3
Press [CD
3/
8
] and then [
7, –DEMO].
4
Press [PLAY MODE] to select your desired mode
(refer to page 9).
(refer to page 9).
5
Press [
¶ REC/
8
] to start recording.
Recording programmed tracks
Recording programmed tracks
1
Insert the cassette to be recorded.
2
Program the tracks you want (refer to page 10).
3
Press [
¶ REC/
8
] to start recording.
Other basic operations
Other basic operations
To
Action
stop recording
Press [
7 ].
stop recording
temporarily
temporarily
1) Press [
¶ REC
/
8
].
2) Press again to resume recording.
record on the other
side of the tape
side of the tape
Turn the cassette over and press
[
[
¶ REC
/
8
].
erase a recorded
sound
sound
1) Insert the cassette to be recorded.
2) Press [TAPE
2) Press [TAPE
3] and then [7, –DEMO].
3) Press [
¶ REC/
8
].
Your attention is drawn to the fact that recording pre-
recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
Erasure prevention
Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
recording. To record on the tape again, cover as shown.
Side A
Tab for side A
Tab for side B
To re-record
Normal tape
Normal tape
Adhesive tape
PM32-33DB_EB_En.indd 11
PM32-33DB_EB_En.indd 11
3/1/06 12:12:19 PM
3/1/06 12:12:19 PM