Panasonic scpm39d User Manual
Simple setup
6
RQT7509
•
Use only supplied speakers
Using other speakers can damage the unit and sound quality will be
negatively affected.
Using other speakers can damage the unit and sound quality will be
negatively affected.
•
Set the speakers up on an even surface to prevent them from
falling. Take proper precautions to prevent the speakers from falling
if you cannot set them up on an even surface.
falling. Take proper precautions to prevent the speakers from falling
if you cannot set them up on an even surface.
Positioning for best effect
How you set up your speakers can affect the bass and the sound
field. Note the following points.
How you set up your speakers can affect the bass and the sound
field. Note the following points.
•
Place speakers on flat secure bases.
•
Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with a thick curtain.
excessive bass. Cover walls and windows with a thick curtain.
•
Keep your speakers at least 10 mm (
13
/
32
”) away from the system for
proper ventilation.
•
To avoid damage to the speakers, do not touch the speaker cones if
you have taken the nets off.
you have taken the nets off.
Notes on speaker use
•
You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
play sound at high levels over extended periods.
•
Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When the speakers emit strange noise (howling) from a record
– When playing distorted sound.
– When the speakers emit strange noise (howling) from a record
player, noise from FM broadcasts, or continuous signals from an
oscillator, test disc, or electronic instrument.
oscillator, test disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
– When turning the unit on or off.
If irregular coloring occurs on your television
These speakers are designed to be used close to a television, but
the picture may be affected with some televisions and set-up
combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.
These speakers are designed to be used close to a television, but
the picture may be affected with some televisions and set-up
combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.
Simple setup
Positioning
STEP
1
Connecting the speakers
STEP
2
White
Blue
Red
Black
Confirm the colors of the tags
on the ends of the cords.
on the ends of the cords.
Twist the vinyl tip and pull off.
Note
•
Never short-circuit positive (+) and negative (–) speaker
wires.
wires.
•
Be sure to connect only positive (copper) wires to
positive (+) terminals and negative (silver) wires to
negative (–) terminals.
Incorrect connection can damage the speakers.
positive (+) terminals and negative (silver) wires to
negative (–) terminals.
Incorrect connection can damage the speakers.
AM ANT
FM ANT
OPTICAL
OUT
OUT
S-VIDEO
HAUT-PARLEURS
OUT
VIDEO
OUT
AC IN
SUBWOOFER
OUT
R
L
AUX
HIGH(6
Ω
)
SPEAKERS (SB-PM39)
LOW(6
Ω
)
R
L
Connect the left (L) side in
the same way.
the same way.
Connect cords so tag colors
match the terminal colors.
match the terminal colors.
White
Red
Black
Blue
Copper(Red tag)
Silver(Black tag)
Silver(Blue tag)
Copper(White tag)
Right speaker
3
SPEAKERS(SB-PM39)
HIGH(6
Ω
) LOW(6
Ω
)
1
2
R
L
EXT
LOOP
75
Ω
COMPONENT VIDEO OUT
P
R
P
B
Y
Speaker
(SB-PM39)
Speaker
(SB-PM39)
Main unit
(SA-PM39D)
Tweeter
Place the speakers so that the tweeter is on the inside.
Caution
Use the speakers only with the
recommended system. Failure to do
so may lead to damage to the
amplifier and/or the speakers, and
may result in the risk of fire. Consult
a qualified service person if damage
has occurred or if you experience a
sudden change in performance.
Do not attach these speakers to walls
or ceilings.
recommended system. Failure to do
so may lead to damage to the
amplifier and/or the speakers, and
may result in the risk of fire. Consult
a qualified service person if damage
has occurred or if you experience a
sudden change in performance.
Do not attach these speakers to walls
or ceilings.