Panasonic sicx User Manual

Page of 102
2. Setting Up Your Phone
ICX-
45
-750
ICX (International), issued June 2000
29
Notes:
• Before linking multiple SSD numbers to a PSD bin, the SSD bins must 
already have been programmed with the appropriate speed dial information. 
(This requires system programming.) 
• If numbers do not appear on the display (00-79 or 000-799) when you use 
SSD codes, your extension is not programmed to display that data.
1.  Pick up the handset or press the ON/OFF key.
2.  Either:
• Press the PROG key and then press the MEMORY key.
OR
• Enter the Speed Dial Set/Clear code (default = 710 (HK/UK) or 710#).
3.  Press the soft or one-touch key (for the PSD bin [80-99]) to be programmed.
4.  Press the MEMORY key.
5.  Enter the SSD bin number that contains the first part of the number to be dialled. 
(If a pause is required, press the REDIAL key.)
6.  Repeat steps 4-5 (up to 5 more times) for each remaining SSD number to be 
linked.
7.  Press the HOLD key when you are finished.
8.  Replace the handset or press the ON/OFF key.
1.  If necessary, select the trunk group (9 [UK/HK], 0 [Tawain, Malaysia, Indonisia], 
or 81-84) to access an outside line. (Normally the trunk is selected by the speed 
dial numbers.)
2.  Press the PSD key.
Assigning and Deleting Names for PSD Numbers
After assigning a PSD number to a one-touch or soft key, you can assign a name to 
the key (e.g., “Home,” “John,” etc.). You can then view the assigned PSD name 
when you are in the PSD Directory mode.
     To link speed dial numbers to a PSD bin
     To use a PSD key that links multiple speed dial numbers