Panasonic sicx User Manual
2. Setting Up Your Phone
ICX-
45
-750
ICX (International), issued June 2000
35
FF6
Message Key ID Code menu
FF7
System Mode menu
FF8
Walking /Station Lock TRS (Call Barring)
FF9
TRF of CWRD
FF10
CID Logging Ext.
Once in a data entry level, you must either enter an acceptable value or restore the
previous value before proceeding. For instance, if you change an entry to an
unacceptable value and then press FF1 to move to the PSD Assignment menu, you
will not be able to proceed. You must first enter an acceptable value.
previous value before proceeding. For instance, if you change an entry to an
unacceptable value and then press FF1 to move to the PSD Assignment menu, you
will not be able to proceed. You must first enter an acceptable value.
To Enter User Maintenance Mode:
1.
Press the ON/OFF key on a telephone with a COS that allows user login.
2.
Press the PROG key.
3.
Press the * key twice.
4.
Press the CONF key.
Note:
Your extension’s Class of Service must be properly set to allow User
Maintenance access. Also, only one user may enter User Maintenance or System
Programming at a time.
Programming at a time.
To create Absence Messages using either a large-display
or small-display phone:
or small-display phone:
1. Enter “User Maintenance” by pressing:
ON/OFF PROG * * CONF
2. Enter:
12
and press
HOLD
HOLD
.
3. Enter:
Message Number (0-9)
.
4. Enter:
Absence Message
(up to 15 characters):
5. If using a large-display phone, press the soft key next to the desired row of
letters.
6. If using a small-display phone press the appropriate one-touch key.
Note: Press the FL/R key to clear any existing data.
Absence Messages