Panasonic sicx User Manual

6. Using Additional Features

ICX-

45

-750

ICX (International), issued June 2000

83

With the installation of additional hardware, you can use verbal commands to dial 
extensions, speed dial numbers, and access various phone features.

Note: This feature requires system programming and addition hardware (VB-44224 
Telephone and VM-44101 Voice Recognition Adaptor). For more information, see 
your system administrator or 

ICX and S-ICX

 dealer.

You can send a signal to your phone to release an outside line by pressing the FL/R 
key or the PROG key.  Once you press either key, your phone will either reseize the 
same outside line or switch to extension dial tone status.

Note: This feature requires system programming. For more information, see your 
system administrator or 

ICX and S-ICX

 dealer.

You can use your phone to create conference calls that include up to three parties. 
(With the installation of an optional 8-party conference card, you can include up to 
eight parties.)

• When no optional conference card is installed, the System supports the 

following types of 3-party conference calls:

• 3 extensions
• 2 extensions and 1 outside line
• 1 extension and 2 outside lines

• When the optional 8-party conference card is installed, the System supports 

any combination of conference calls, except all outside lines.

The Version 3.0 software release allows any combination of extensions and trunk 
lines be in the conference as long as the original extension is in the conference and 
the total number of parties does not exceed 8. With Version 3.0 software, only one 
operation is used to establish and add to a conference. You simply have to place the 
current call on hold, dial the next party and press the CONF key. No different 
operation or access code is required to add additional parties to the call.

1.  While on a call, press the HOLD key or the outside line key you are using.

2.  If adding an outside party, press a vacant trunk key or dial a trunk access code.