Panasonic SL-CT570 User Manual

The disc plays from a selected track through to the last track,
then play stops automatically.

Put unit in stop mode. (See page 3.)

Up to 24 tracks can be entered in the program.

Put unit in stop mode. (See page 3.)

(The indication “M” and the programmed sequence appear
on the display.)

∫

After step 3, press [MEMORY/RECALL] the desired number of
times.

∫

'

No more tracks can be added to the sequence.

∫

Press [MEMORY/RECALL] while the disc is playing. (The num-
bers of the programmed tracks appear on the display in se-
quence.)

∫

Press [

∫

, OPR OFF].

≥

It is also possible to press [

9

] while the unit is in stop mode

to change the first track to be played. (All tracks are played
eventually, regardless of which is played first.)

≥

Program play is not possible in the random mode.

This function allows you to listen from the beginning of the track
where play stopped because the unit was powered off (or
switched to stop mode). It is useful when listening to CDs in the
car, etc.

≥

If [RESUME, RANDOM, NORMAL] is put in the [RESUME] po-
sition, the all-track repeat function will be activated automatical-
ly as soon as the unit is powered on.

≥

If power is cut off near the end of a track (off mode), playback
may resume from the beginning of the next track in some
cases.

≥

If the unit is powered off while a disc was playing and then a
new disc is inserted, play will begin from the middle of the new
disc because the unit remembers the position where play
stopped on the previous disc.

The setting is switched in the sequence indicated below each
time [

`

] is pressed.

`

( -----------]

One track is repeated.

|

v

|

`

|

All the tracks on the

|

disc are repeated.

|

v

|

Cancel (no indicator is shown) 

--}

If “ALL 

`

” is selected during program play, only the tracks in

the programmed sequence are repeated.
(The indication “ALL” is not displayed.)

The setting switches in the sequence indicated below each time
[EQ] is pressed.
S-XBS

>

>

>

Cancel (no indicator is shown)

^---------------------------------------------------}

Select this setting to boost the low-range response.

Select this setting to avoid annoying other passengers with noise
from your earphones while riding on the train, or to reduce fa-
tigue when listening for a long period of time.

Select this setting to reproduce the sound as if it would be heard
in a concert hall.

The sound quality setting does not affect the output from the
[OPT OUT] (optical digital output) jack.

Release 

Release 

A

EQ

A

M

C

9

:

5

6

F

1;

M

F

1;

M

H

`

M

M

M

C

9

:

5

6

B

MEMORY/

RECALL

F

1;

The anti-shock function works by reading audio data and storing
it in memory (up to 40 seconds worth). The unit then fills in inter-
ruptions caused by bumps and vibrations with data from the
memory. This unit also incorporates a powerful anti-shock mech-
anism that prevents skipping caused when play speed is
changed by swinging of the unit.
You can choose one of two types, with either 10 or 40-second
memory. There is no loss of sound quality if you choose the 10-
second mode.

Each time you press the button,

If you have pressed [A.SHOCK] when the unit is in stop
mode, press [

1;

] to start play.

The message “SORRY” appears on the display and sound is in-
terrupted.

≥

The anti-shock setting can be changed during play, but this
may cause a slight interruption in the sound because the disc’s
rotational speed changes.

≥

During the anti-shock operation, the disc rotates at a higher rate
than usual in collecting extra audio data.

≥

This could result in a slight increase in disc rotation noise.

Set anti-shock to 10-second mode or turn it off for purer sound.
The 40-second mode digitally compresses the audio signal.

I

A. SHOCK

D

Cancel

D