Panasonic SL-CT490 User Manual
Battery indicator
This indicator flashes when the batteries are almost out
of power. Power is cut off completely a short while later.
Rechargeable batteries: Recharge batteries.
Dry-cell batteries: Replace batteries with new ones.
of power. Power is cut off completely a short while later.
Rechargeable batteries: Recharge batteries.
Dry-cell batteries: Replace batteries with new ones.
Note
!
≥
The length of time the unit will continue to operate be-
tween when the battery indicator starts flashing and
when the power is cut off differs depending on the
type of batteries used.
tween when the battery indicator starts flashing and
when the power is cut off differs depending on the
type of batteries used.
≥
The battery indicator may not be displayed if recharge-
able batteries other than those designated by
Panasonic are used.
able batteries other than those designated by
Panasonic are used.
Using the car adaptor (not included)
Be sure to obtain the car adaptor (SH-CDC9), available
as an optional accessory.
The car adaptor can be used to recharge the unit’s bat-
teries while in the car.
as an optional accessory.
The car adaptor can be used to recharge the unit’s bat-
teries while in the car.
2
Power Supply Preparations
Refer to the specifications (page 8) for information on operating times when using rechargeable batteries or dry cell batteries.
CAUTION:
Use only car adaptor, Model: SH-CDC9 manufac-
tured by Matsushita Electric Industrial Co., Ltd.
tured by Matsushita Electric Industrial Co., Ltd.
Removing
batteries
batteries
Push up on the battery
in the direction indicat-
ed by the arrow. Then
lift it out.
in the direction indicat-
ed by the arrow. Then
lift it out.
If the battery lid
comes loose
comes loose
Slide the lid back into
place horizontally.
place horizontally.
OPEN
OPEN
If the unit malfunctions or freezes during
use, disconnect the power source (the AC
adaptor or batteries).
Re-connect the power source and contin-
ue operation.
use, disconnect the power source (the AC
adaptor or batteries).
Re-connect the power source and contin-
ue operation.
This function causes the unit to ignore short, accidental
button presses. (The disc lid can still be opened and
closed.)
button presses. (The disc lid can still be opened and
closed.)
The HOLD function prevents the following:
≥
The unit is powered on accidentally when not in use,
causing the batteries to run down.
causing the batteries to run down.
≥
A button is accidentally pressed during play, interrupt-
ing the operation.
ing the operation.
To use the HOLD function
Set [HOLD] to the HOLD position.
The unit and wired remote control have HOLD func-
tions, each of which works independently.
tions, each of which works independently.
“
(
” indication
When the main unit is in HOLD mode, pressing any but-
ton causes the indication “(” to appear on the dis-
play.
When the unit is powered off
The “(” indication appears only when [1/;] (main
unit) is pressed.
ton causes the indication “(” to appear on the dis-
play.
When the unit is powered off
The “(” indication appears only when [1/;] (main
unit) is pressed.
Before operating the buttons
Be sure to move [HOLD] to release the unit from
the HOLD mode.
Be sure to move [HOLD] to release the unit from
the HOLD mode.
HOLD
HOLD
EQ
HOLD
HOLD
HOLD
VO
L
ME
MO
RY
REC
ALL
EQ
EQ
MO
DE
OPEN
Ë
HO
LD
HOLD mode
HOLD function
Battery indicator
S-XBS
C
Using the AC adaptor (not included)
Use only the recommended AC adaptor. Using other
adaptors can cause overheating which can lead to fire.
adaptors can cause overheating which can lead to fire.
Connect the AC adaptor.
Conserving power
To save power when the unit is not to be used for a long
time, unplug the AC adaptor from the household AC
outlet. Reprogram tracks if necessary before use.
time, unplug the AC adaptor from the household AC
outlet. Reprogram tracks if necessary before use.
Note
!
Turn the unit off before connecting or disconnecting the
AC adaptor.
AC adaptor.
Using the rechargeable batteries
(not included)
(not included)
Obtain the optional rechargeable batteries.
Make sure to recharge the batteries before using them.
The unit cannot be used to charge rechargeable batter-
ies other than those specially designed for it.
Optional batteries: P-3GAVA/2B
Make sure to recharge the batteries before using them.
The unit cannot be used to charge rechargeable batter-
ies other than those specially designed for it.
Optional batteries: P-3GAVA/2B
Charging procedure
1
Insert the special rechargeable bat-
teries into the unit.
teries into the unit.
HOLD
Ë
DC IN 4.5V
DC IN jack (K DC IN 4.5 V)
Side panel of
the unit
the unit
Household
AC outlet
AC outlet
AC adaptor
For U.S.A
To order the optional AC adaptor RP-AC46 contact 1-
800-332-5368 or web site (http://www.panasonic.com).
For Canada
Be sure to obtain the optional AC adaptor RP-AC46.
it is available through your Panasonic dealer.
To order the optional AC adaptor RP-AC46 contact 1-
800-332-5368 or web site (http://www.panasonic.com).
For Canada
Be sure to obtain the optional AC adaptor RP-AC46.
it is available through your Panasonic dealer.
Note
!
≥
Rechargeable batteries have a service life of approxi-
mately 300 charge-discharge cycles. The batteries
have reached the end of their operational life if they
last for a noticeably shorter time after recharging, or if
they cannot be recharged at all. Replace the batteries.
mately 300 charge-discharge cycles. The batteries
have reached the end of their operational life if they
last for a noticeably shorter time after recharging, or if
they cannot be recharged at all. Replace the batteries.
≥
Recharging may only be performed when the unit is
powered off.
powered off.
≥
The AC adaptor and rechargeable batteries may be-
come warm while recharging is in progress. This is not
a malfunction.
come warm while recharging is in progress. This is not
a malfunction.
≥
Leaving the AC adaptor connected can cause the bat-
teries to go flat. After recharging the batteries and dis-
connecting the AC adaptor from the AC power outlet,
ensure you disconnect the AC adaptor from the unit’s
[KDC IN 4.5 V] terminal.
teries to go flat. After recharging the batteries and dis-
connecting the AC adaptor from the AC power outlet,
ensure you disconnect the AC adaptor from the unit’s
[KDC IN 4.5 V] terminal.
≥
Never mix dry cell and rechargeable batteries.
≥
Turn the unit off before replacing the recharge-
able batteries.
able batteries.
2
Connect the AC adaptor.
(Refer to “Using the AC adaptor”.)
Recharging starts and the “H” charging indicator
flashes on the unit’s display. The indicator goes
out when charging is complete.
Recharging starts and the “H” charging indicator
flashes on the unit’s display. The indicator goes
out when charging is complete.
3
When charging is complete, unplug
the AC adaptor from the household
AC outlet and DC IN jack.
the AC adaptor from the household
AC outlet and DC IN jack.
Using the dry cell batteries
(not included)
After disconnecting the AC adaptor, insert two “LR6,
AA, UM3” alkaline batteries.
The procedure for inserting and removing dry cell
batteries is identical to that for rechargeable batter-
ies.
AA, UM3” alkaline batteries.
The procedure for inserting and removing dry cell
batteries is identical to that for rechargeable batter-
ies.
This system deals with skipping in a variety
of ways:
of ways:
≥
The thinner and lighter construction makes the unit
less susceptible to vibration.
less susceptible to vibration.
≥
An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
when play speed changes due to swinging of the unit.
≥
A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.
up to its original position if it is knocked off the track by
a strong shock.
≥
Anti-skip (max. 48 seconds) memory fills in interrup-
tions caused by bumps and vibrations.
tions caused by bumps and vibrations.
The anti-skip system works automatically while the
system is on and cannot be canceled.
.
system is on and cannot be canceled.
.
When bumps continue repeatedly
The elapsed playing time disappears and sound is inter-
rupted.
rupted.
Note
!
≥
While the system is on, the disc rotates at a higher
rate than usual in collecting extra audio data. This
could result in a slight increase in disc rotation noise.
rate than usual in collecting extra audio data. This
could result in a slight increase in disc rotation noise.
≥
The anti-skip memory compresses digital signals.
S-XBS
Anti-Skip System
OPEN
OPEN
OPEN
1
2
3
+
-
HOLD mode
Release
Release