Panasonic sl-pd7apc User Manual
9
Operations
RQT5763
Program play
This unit has two program play modes; program (PGM) and delete
(DEL).
Program mode allows you to select and play your favorite tracks in
the order you want to hear them.
Delete mode allows you to program the unit not to play certain
tracks. This mode can be used in combination with sequential and
random play.
Up to 32 tracks can be selected for each mode.
(DEL).
Program mode allows you to select and play your favorite tracks in
the order you want to hear them.
Delete mode allows you to program the unit not to play certain
tracks. This mode can be used in combination with sequential and
random play.
Up to 32 tracks can be selected for each mode.
1
While the unit is stopped
Select the mode with [PROGRAM MODE].
Every time you press the button:
PGM DEL (off)
2
Press [DISC (1 to 5)] to select the required disc.
“AL” appears on the display to indicate all the tracks on the
disc are selected.
Repeat the above if you want to make selection by disc only.
The number of programmed items increases by one each time
a [DISC] button is pressed.
disc are selected.
Repeat the above if you want to make selection by disc only.
The number of programmed items increases by one each time
a [DISC] button is pressed.
3
Press the numeric button(s) to select a track.
To select a two-digit track number over 10
(or to select a two-digit track from the remote control for
SL-PD9)
Press [>10] ([
(or to select a two-digit track from the remote control for
SL-PD9)
Press [>10] ([
≥
10] on the remote control for SL-PD9) and then
the two numbers you want within 7 seconds or so.
For example
For example
Track no. 20: [>10] ([
≥
10] on the remote control for SL-PD9)
[2]
[0]
4
Repeat steps
2
and
3
to complete the selection.
If a non-existing disc or track number is entered, the selection
is initially recorded but erased automatically during playback.
“-F” is displayed if you attempt to enter a 33rd item.
is initially recorded but erased automatically during playback.
“-F” is displayed if you attempt to enter a 33rd item.
5
Press [
] to start play.
Additional selections can be made during play by repeating
steps
steps
2
and
3
.
To use random play and delete mode together
After step
4
, make your random play mode selection (see page 8).
To cancel program play
While the unit is stopped
Press [PROGRAM MODE] to select “(off)” mode.
The contents of the program remain in the unit’s memory even after
the unit is turned off.
the unit is turned off.
To use the program again
1. Press [PROGRAM MODE] to select the required mode.
2. Press [ ].
1. Press [PROGRAM MODE] to select the required mode.
2. Press [ ].
For your reference
The program remains in the memory for up to two weeks even if the
unit is disconnected from its power source.
The program remains in the memory for up to two weeks even if the
unit is disconnected from its power source.
1
2
3
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PGM
SEC
MIN
TRACK
DISC
PGM
No.
TRACK
DISC
DEL
No.
TRACK
DISC
SEC
MIN
TRACK
DISC
PGM
No.
TRACK
DISC
Specified disc number
PGM
No.
TRACK
DISC
Specified track number
Program order
4
7
2
5
8
3
6
9
0
1
10
10
OPEN CLOSE
POWER
/
I
REPEAT
SPIRAL
RANDOM MODE
TIME MODE
EDIT GUIDE
ID SCAN
PROGRAM MODE
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
DISC SKIP
1
2
5
3
PROGRAM MODE
4
7
2
5
8
3
6
9
0
1
10
10
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
SL-PD9
SL-PD7A