Panasonic SL-SW891C User Manual

In step 3, connect the plug of the stereo headphones to the [

Ë

] jack, and plug in firmly until you hear the second click. 

≥

Play stops automatically when all the tracks have been played.

≥

If the unit has been connected to the car audio system, adjust the volume level between 5 and 8 on the unit, then adjust the volume
level on the system. (The numbers indicating volume are on the bottom of the dial.)

This indication appears for about 30 seconds if [

1;

] is

pressed when no disc is loaded in the unit or if the disc
is not completely seated.

*

This indication appears for about 10 minutes when the
cover is opened. (However, the indication does not ap-
pear when the unit is powered off.)

Never insert foreign objects into the unit body.

∫

Do not stop the disc by hand or try to remove it before it stops ro-

tating. This can damage CDs.

≥

During program play (page 4.), these buttons are
used to skip forward or back through the pro-
grammed sequence of tracks.

≥

During random play (page 4.), the skip buttons
cannot be used to skip back to tracks that were
played previously in the random sequence.

≥

During program play, random play or 1 track re-
peat play (page 4.), search operation is limited to
the current track only.

Press during play.

Press during play.

Press during
stop mode.

Press during play.

Press again to
restart play.

Press and hold during play.

If the unit is left in stop or paused status for approxi-
mately 10 minutes, the unit powers itself off auto-
matically in order to prevent the battery from
running down.
(If no disc is loaded in the unit, it powers itself off in
about 30 seconds.)

L

R

1;

R

L

1;

∫

∫

6

5

:

9

Label must face upward.

Track number in play

Elapsed playing time of each track

(Backward)

(Forward)

Total number of tracks

Total playing time

Plug type:
3.5 mm (1/8 in.) stereo

Open with both hands.