Panasonic sl-s355 User Manual
Using the Unit with Optional Accessories
Using the unit with an audio
system
system
Using stereo connection cable (not included), you can
hear CDs on your audio system.
hear CDs on your audio system.
≥
Connect the cable to the amplifier after turning off its
power.
power.
≥
Do not connect the cable to the PHONO jacks on the
amplifier.
amplifier.
≥
Obtain the optional connecting cable if the amplifier
comes with mini-phone jacks.
comes with mini-phone jacks.
≥
Adjust the volume on the amplifier.
≥
Sound quality changes when S-XBS is selected, but
volume is reduced by approximately fifty percent.
volume is reduced by approximately fifty percent.
Using the unit with a car audio
system
system
Items to be purchased
For connection to the car audio system
Car stereo cassette adaptor (SH-CDM10A)
For securing the unit and connecting the power
supply:
supply:
≥
Car adaptor (SH-CDC9)
≥
Car mounting kit (SH-CDF7)
≥
Car mounting arm, Car insulator
Note
!
It may not be possible to use the unit with some types of car
stereos owing to restrictions imposed by the construction of the
car stereo cassette adaptor.
stereos owing to restrictions imposed by the construction of the
car stereo cassette adaptor.
For further details, refer to the instructions of the part concerned.
L
R
Connect the car stereo cassette adaptor
to the unit’s headphone jack.
(When doing this, keep the unit’s VOLUME
control at a setting between 4 and 6.)
to the unit’s headphone jack.
(When doing this, keep the unit’s VOLUME
control at a setting between 4 and 6.)
Anti shock works by reading audio data and storing it in
memory (up to 40 seconds worth). The unit then fills in
interruptions caused by bumps and vibrations with data
from the memory. This unit also incorporates a powerful
anti-shock mechanism that prevents skipping caused
when play speed is changed by swinging of the unit.
memory (up to 40 seconds worth). The unit then fills in
interruptions caused by bumps and vibrations with data
from the memory. This unit also incorporates a powerful
anti-shock mechanism that prevents skipping caused
when play speed is changed by swinging of the unit.
Press during play or stop mode.
The following indicator appears on the display panel.
Note
!
If you have pressed [A.SHOCK] when the unit is in stop
status, press [
status, press [
1;
] to start play.
When bumps continue repeatedly
The following indicator appears on the display panel
and sound is interrupted.
and sound is interrupted.
To cancel the anti-shock function
Press [A.SHOCK] again.
Note
!
≥
The anti-shock setting can be changed during play,
but this may cause a slight interruption in the sound
because the disc’s rotation speed changes.
but this may cause a slight interruption in the sound
because the disc’s rotation speed changes.
≥
During anti-shock operation, the disc rotates at a high-
er rate than usual to collect extra audio data. This
could result in a slight increase in disc rotation noise.
er rate than usual to collect extra audio data. This
could result in a slight increase in disc rotation noise.
Using the unit with an audio system
The anti-shock function uses digital signal compression
technology. It is recommended that the anti-shock func-
tion be canceled if the unit is connected to a home
audio system.
technology. It is recommended that the anti-shock func-
tion be canceled if the unit is connected to a home
audio system.
Anti-Shock Function
5
If you ship the product
Carefully pack and send it prepaid, adequately insured and preferably in the original carton.
Attach a postage-affixed letter, detailing the complaint, to the outside of the carton.
Attach a postage-affixed letter, detailing the complaint, to the outside of the carton.
Do NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to make repairs.
Model
No.
No.
Serial
No.
or
No.
or
Code
No.
No.
Date
of
Purchase
of
Purchase
Dealer’s
Name
Name
Dealer’s
Address
Address
Customer’s Record
I
A.SHOCK
B
A.SHOCK
B
A.SHOCK
OUT jack
Back panel of the unit
Amplifier
(White)
(Red)
Stereo connection cable (not included)
To CD or AUX
terminals
terminals
RQT5234