Panasonic sx-pr54m User Manual
136
QQTG0701
Symptoms which appear to be signs of
trouble
trouble
Phenomenon
Remedy
The buttons, keys, etc. malfunction.
• Turn off the POWER button once, then turn it on again.
If this procedure is not successful, turn off the POWER
button once. Then, while pressing the three lower left
buttons in the RHYTHM GROUP section (8BEAT,
16BEAT and USA) at the same time, turn the POWER
button on again. (Note that, in this case, all program-
mable settings, functions and memories return to their
factory-preset status.)
button once. Then, while pressing the three lower left
buttons in the RHYTHM GROUP section (8BEAT,
16BEAT and USA) at the same time, turn the POWER
button on again. (Note that, in this case, all program-
mable settings, functions and memories return to their
factory-preset status.)
No sound is produced when the keys are
pressed.
pressed.
• The MAIN VOLUME is at the minimum setting. Adjust
the volume with the MAIN VOLUME control.
• The volumes for the selected parts are set to the mini-
mum levels. Use the balance buttons to set the vol-
umes of the relevant parts to appropriate levels. (Refer
to page 27.)
umes of the relevant parts to appropriate levels. (Refer
to page 27.)
• The part is muted. (Refer to page 27.)
• The LOCAL CONTROL for a part performed on the
• The LOCAL CONTROL for a part performed on the
keyboard is set to OFF. Set the LOCAL CONTROL to
ON. (Refer to page 128.)
ON. (Refer to page 128.)
Only percussive instrument sounds are produced
when the keyboard is played.
when the keyboard is played.
• In the SOUND GROUP section, the DRUM KITS but-
ton is on.
The volume is very low when the keyboard is
played.
played.
• The volume setting in the SEQUENCER contents is
very low. Follow the INITIAL procedure to reset the
settings. (Refer to page 133.)
settings. (Refer to page 133.)
The sound you hear is different from the sound
you selected.
you selected.
• This sometimes occurs when you play back
SEQUENCER or COMPOSER data which was cre-
ated on a different model, or when MIDI data is
received from a connected instrument. Select the
desired sounds again.
ated on a different model, or when MIDI data is
received from a connected instrument. Select the
desired sounds again.
The rhythm does not start.
• The DRUMS volume is set to the minimum level. Use
the balance buttons to set the DRUMS volume to an
appropriate level.
appropriate level.
• A SEQUENCER PLAY button is on. When you are not
playing back the SEQUENCER performance, turn off
the SEQUENCER PLAY button.
the SEQUENCER PLAY button.
• CLOCK is set to MIDI. Set CLOCK to INTERNAL.
(Refer to page 128.)
No sound is produced for the automatic accom-
paniment, or only the sounds of some parts are
produced.
paniment, or only the sounds of some parts are
produced.
• An ACCOMP part does not sound if its corresponding
volume is set to the minimum level. Use the respective
balance buttons to set the ACCOMP 1–5 volumes to
appropriate levels.
balance buttons to set the ACCOMP 1–5 volumes to
appropriate levels.
• The APC/SEQUENCER VOLUME is at the minimum
setting. Adjust the volume with the APC/SEQUENCER
VOLUME control.
VOLUME control.
Storage is not possible.
• The remaining memory capacity of the SEQUENCER
is 0. Follow the SONG CLEAR or TRACK CLEAR pro-
cedure to erase the memory. (Refer to page 72.)
cedure to erase the memory. (Refer to page 72.)
The playback measure indication is different from
when the performance was recorded.
when the performance was recorded.
• The number of measures corresponds to the time sig-
nature of the rhythm selected at the start of recording.
To change the rhythm in the middle of the song, record
the rhythm change in the RHYTHM part. (Refer to
page 69.)
To change the rhythm in the middle of the song, record
the rhythm change in the RHYTHM part. (Refer to
page 69.)
Soun
ds and
effect
s
Rh
y
thm
AUTO
PLAY
CH
O
R
D
SEQ
UENCER
17_Initialize.fm 136 ページ ２００３年５月２０日 火曜日 午前８時２０分