Panasonic th-42pa20e User Manual
40
Tuning your VCR and satellite receiver
Your new TV is supplied with programme position ‘0’ set to receive an RF signal from your VCR, although a Scart
connection is preferable if the VCR is so equipped (see page 9, 10 or 44 for suitable inputs to the Scart socket on this
set.)
However, if for some reason your VCR is tuned to a different RF channel then you will not receive any picture or sound
from your VCR on programme position ‘0’ of this set. Either adjust the tuning of this TV programme position ‘0’ (follow
the instructions below) or adjust the RF channel of your VCR (some VCR’s allow adjustment of their RF channel via
their remote control unit) or both until this TV the RF output channel of your VCR.
It is intended that this advice is used in conjunction with the instruction books for your additional equipment.
connection is preferable if the VCR is so equipped (see page 9, 10 or 44 for suitable inputs to the Scart socket on this
set.)
However, if for some reason your VCR is tuned to a different RF channel then you will not receive any picture or sound
from your VCR on programme position ‘0’ of this set. Either adjust the tuning of this TV programme position ‘0’ (follow
the instructions below) or adjust the RF channel of your VCR (some VCR’s allow adjustment of their RF channel via
their remote control unit) or both until this TV the RF output channel of your VCR.
It is intended that this advice is used in conjunction with the instruction books for your additional equipment.
Tuning your TV to the VCR
Switch on the VCR, insert and play a pre-recorded tape with known content.
1
Press to display the Setup menu
screen.
screen.
2
Press to select the Tuning menu.
Press to Access the Tuning menu
screen.
screen.
3
Press to select the Manual tuning.
Press to Access the Manual
tuning screen.
tuning screen.
4
Press to select program position ‘0’
VCR.
VCR.
Press to start seaching for the
VCR playback of the known
content tape.
When the VCR playback is found,
VCR playback of the known
content tape.
When the VCR playback is found,
press
STR
to store.
Press to exit.
SET UP
02 99:21 41
Manual tuning
TV/AV
’STR’ Button Store
’STR’ Button Store
E x i t
Serch
down / up
down / up
Programme
down / up
down / up
Return
CH44
VCR
VCR
Tuning menu
OSD language
OSD language
Q-Link
Side panel
Off
Power save
Off
Off timer
Off
Teletext
TOP
Text language
West
AV2 out
TV
Setup menu
Off
Access
Decoder (AV2)
Volume correc.
Programme edit
Auto setup
Manual tuning
Auto setup
Manual tuning
Fine tuning
Colour system
Colour system
Tuning menu
Access
Auto
Off
The tape with known content
is found and displayed.
Pressing
is found and displayed.
Pressing
STR
will store the
setting.
Notes:
• If picture patterning occurs on programme position ‘0’ it may be necessary to adjust the RF output channel of the
• If picture patterning occurs on programme position ‘0’ it may be necessary to adjust the RF output channel of the
VCR, refer to the VCR instruction book.
• If a Satellite Receiver and a VCR are going to be used with RF cable connections it is important to avoid both units
being set on the same channel.
Refer to the Satellite Receiver and VCR instruction books for precise tuning information.
Refer to the Satellite Receiver and VCR instruction books for precise tuning information.
N
1
2
3
4
5
6
7
8
9
0
C
TV/AV