Panasonic tc-21p50r User Manual

Use the Position Number Up “

∧

”

button to sequentially check
each station.
If necessary, repeat steps 3 to
4 for each Position Number.

After all stations are tuned,
push the “PRE.” (preset)
button 5 times.

This returns the set to the
normal viewing condition.
Position Number memory
locations.

(1) To tune, push the “Main Menu” button and Position button on the Remote Control.

By following the display in the PRESET menu, setting can be formed using only the Remote Control.

(2) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the

“Colour System Selection” operation on page 29.

(3) After the Automatic tune is finished, push  the Position Number “

∧

” button to confirm the tuning condition for each

Position. If some Position Numbers are unused, it is possible to skip such Position Numbers. Please refer to the
Position Number Skip operation on page 24.

(4) Repeated pushing of the “PRE.” (preset) button changes the PRESET menu as follows;

COLOUR SYS

(Page 29)

(Page 20)

MANUAL TUNE

AUTO TUNE

(Page 28)

SOUND SYS

(Page 18)

(Page 22)

FINE TUNE

(Page 24)

SKIP

TV Mode

POS.CHANGE

(Normal viewing condition)

(Page 25 )

3

4

PRE.