Panasonic th-37pa20h User Manual
21
Tuning Channels
Manual Tune
MANUAL TUNE
Press to select the MANUAL TUNE.
Press to access to the MANUAL TUNE.
Before Manual Tune, Channel Select and Regional System must already be set (see page 18).
SOUND SYS
Press to display the SETUP MENU.
Proceed to the TUNING MENU, and then to the SOUND SYS (see page 16, 17).
Search Start.
Press to select the desired Programme Number.
Press to select the higher or lower channel.
When a station
is found.
is found.
When the desired station is found, press to store.
The tuning position is memorized.
The tuning position is memorized.
Press to exit from the TUNING MENU.
This returns the set to the normal viewing condition.
This returns the set to the normal viewing condition.
Adjust the Sound System (rsee page 20 step 2 to 3).
(1) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the
“Colour System Selection” operation on page 24.
(2)
(3) When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as
indicated in the instruction manual of VCR and to set the designated channel to programme No. “0”. In that case,
perform manual tune after setting the colour system and sound system in advance. Further, in multi-system VCR,
it is more convenient to set the designated channel to several programme Numbers.
it is more convenient to set the designated channel to several programme Numbers.
After the Manual tune or the Automatic tune is finished, under the normal viewing condition
press this button to confirm the tuning condition for each Programme Number. If some Programme
Numbers are unused (no TV stations), it is possible to skip such Programme Numbers. Please
refer to the Programme Number Skip operation on page 23.
press this button to confirm the tuning condition for each Programme Number. If some Programme
Numbers are unused (no TV stations), it is possible to skip such Programme Numbers. Please
refer to the Programme Number Skip operation on page 23.
SET UP
CH 12
29
MANUAL TUNE
PROGRAMME - /+
SEARCH - /+
SEARCH - /+
RETURN
TV / AV - EXIT
‘STR’ BUTTON-STORE
‘STR’ BUTTON-STORE
STR
TV/AV
1
2
3
Helpful Hint
FINE TUNE
COLOUR SYS
CH SELECT
SYS SELECT
AUTO TUNE
MANUAL TUNE
SOUND SYS
SYS SELECT
AUTO TUNE
MANUAL TUNE
SOUND SYS
TUNING MENU
6. 0 MHz
AUTO
AUTO
SKIP
OFF
POSITION
ACCESS
HK / UK
Manual Tune (via front panel)
S VIDEO
R - STANDBY
G - POWER ON
G - POWER ON
STR
F
TV/AV
AV3
VIDEO
L
R
/
/
STR
F
TV/AV
/
/
It is also possible to use the control panel buttons on the front of the TV to tune individual programme positions.
1
Press
F
(Front panel) until TUNING MODE is reached.
2
Press
/
or
/
to access TUNING MODE.
3
Press
TV/AV
to move between Change programme, Search and Change TV system.
4
Press
/
or
/
to change programme position or start search.
When the desired station is found, press
STR
to store.
The programme position will flash.
Repeat above procedure to tune additional programme positions.
Repeat above procedure to tune additional programme positions.
Press
F
at any time to exit the TUNING MENU.