Panasonic television User Manual
Driver Setup Adjustment
Driver Set-up
Item / Preparation
1. Input a white signal to one of the
unit’s video input.
2. Set the picture controls as follows:
Picture menu: Vivid
Normal: Set
Aspect: Full
Item / Preparation
1. Input a white signal to one of the
unit’s video input.
2. Set the picture controls as follows:
Picture menu: Vivid
Normal: Set
Aspect: Full
Caution
1. Perform the Vsus adjustment.
2. Confirm the voltage level of VSCN.
This should be done after the
adjustment of Vad which should be
1. Perform the Vsus adjustment.
2. Confirm the voltage level of VSCN.
This should be done after the
adjustment of Vad which should be
-105V
When Vad = -105V, Vscn voltage is 35V
±4V.
Note: See the panel label for voltages
that are not listed in the service manual.
that are not listed in the service manual.
96