Panasonic th-37pv70fa User Manual

5

(Cleaning an energized TV may cause electrical shock.)

 When cleaning the TV, remove the 

Blocked ventilation by curtains, 

etc. may cause overheating, fi re 

or electrical shock.

Regular care: Gently wipe the surface clean of dirt by using a soft cloth.

Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral 

detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.

Regular care: Wipe the surface clean using a soft dry cloth.

Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. 

Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.

Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)

• 

The surface of the display panel has been specially treated and may be easily damaged.

Do not tap or scratch the surface with your fi ngernail or other hard object.

• 

Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances

(this may degrade surface quality).

• 

Use care not to subject the TV's surfaces to detergent.

(A liquid inside the TV could lead to product failure.)

• 

Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances

(this may deteriorate the surface by peeling the paint).

• 

Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.

 When TV will not be used for a 

This TV will still consume some power even 

in the Off mode, as long as the mains plug is 

still connected to a live socket outlet.

Electronic equipment
In particular, do not place video equipment near the 

TV (electromagnetic interference may distort images 

/ sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect 

operation of other equipment).

 Keep the TV away from these equipment

If no signal is received and no operation is 

performed in TV mode for 30 minutes, the TV will 

automatically go to standby mode.

 Auto power standby function

Transporting the TV with its display panel 

facing upright or downward may cause 

damage to the internal circuitry.

 Transport only in upright position

This causes the image to remain on the plasma 

screen (“image retention”).

This is not considered a malfunction and is not 

covered by the warranty.

To prevent image retention, contrast is lowered 

automatically after a few minutes if no signals are 

sent or no operations are performed. (p. 39)

Typical still images

Channel number and other logos

Image displayed in 4:3 mode

Video game

Computer image

Minimum distance

10

10

10

7

(cm)