Panasonic th-37pa20a User Manual
19
Tuning Channels
Manual tuning
Press to select the Manual tuning.
Press to access to the Manual tuning.
Before Manual tuning, Regional System must already be set (see page 18).
Search Start.
Press to select the desired Programme Number.
Press to select the higher or lower channel.
When a station
is found.
is found.
When the desired station is found, press to store.
The tuning position is memorized.
The tuning position is memorized.
Press to exit from the Tuning Menu.
This returns the set to the normal viewing condition.
This returns the set to the normal viewing condition.
(1)
(2) When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as
indicated in the instruction manual of VCR and to set the designated channel to programme No. “0”. In that case,
perform manual tune after setting the colour system and sound system in advance. Further, in multi-system VCR,
it is more convenient to set the designated channel to several programme Numbers.
perform manual tune after setting the colour system and sound system in advance. Further, in multi-system VCR,
it is more convenient to set the designated channel to several programme Numbers.
After the Manual tuning or the Auto tuning is finished, under the normal viewing condition press
this button to confirm the tuning condition for each Programme Number. If some Programme
Numbers are unused (no TV stations), it is possible to skip such Programme Numbers. Please
refer to the Programme Number Skip operation on page 21.
this button to confirm the tuning condition for each Programme Number. If some Programme
Numbers are unused (no TV stations), it is possible to skip such Programme Numbers. Please
refer to the Programme Number Skip operation on page 21.
29
Manual tuning
Search
down/up
Programme
down/up
Return
TV / AV - Exit
‘STR’ Button-Store
‘STR’ Button-Store
STR
TV/AV
Fine tuning
Sys select
Auto tuning
Manual tuning
Auto tuning
Manual tuning
Tuning menu
Skip
Australia
Access
Off
Manual tuning (via front panel)
It is also possible to use the control panel buttons on the front of the TV to tune individual programme positions.
1
Press
F
(Front panel) until Tuning mode is reached.
2
Press
/
or
/
to access Tuning mode.
3
Press
TV/AV
to move between Change programme, Search
and Change TV system.
4
Press
/
or
/
to change programme position or start search.
When the desired station is found, press
STR
to store.
The programme position will flash.
Repeat above procedure to tune additional programme
positions.
Repeat above procedure to tune additional programme
positions.
Press
F
at any time to exit the Tuning menu.
S VIDEO
R - STANDBY
G - POWER ON
G - POWER ON
STR
F
TV/AV
AV3
VIDEO
L
R
/
/
STR
F
TV/AV
/
/
Helpful Hint ( /
Normalise
Normalisation)