Panasonic th-37lru50 User Manual

Model No.

Hospitality LCD HDTV

Thank you for purchasing this Panasonic product.
Please read these instructions before operating your set 
and retain them for future reference. The images shown in 
this manual are for illustrative purposes only.

SDXC Logo is a trademark of 
SD-3C, LLC.

This product qualifies for ENERGY 
STAR in the factory default setting 
and this is the setting in which energy 
savings will be achieved.
Any modifications to the factory 
default setting or other factory default 
settings could result in greater energy 
consumption beyond levels that meet 
ENERGY STAR qualifications.

Manufactured under license from Dolby Laboratories. Dolby and the 
double-D symbol are trademarks of Dolby Laboratories.

Pro: Idiom is a trademark of Zenith 
Corporation.

Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the LCD 
TV and to protect it from overheating. These openings must not be blocked or covered. There should be at least 4 inches (10 cm) 
of space around the TV. The openings should never be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface. 
This LCD TV should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.

The lightning flash with arrowhead 
within a triangle is intended to tell the 
user that parts inside the product are 
a risk of electric shock to persons.

The exclamation point within a 
triangle is intended to tell the 
user that important operating 
and servicing instructions are in 
the papers with the appliance.

1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 
8)  Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that 

produce heat.

9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider 

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are 
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the 
obsolete outlet. 

10)  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and 

the point where they exit from the apparatus.

11)  Only use attachments / accessories specified by the manufacturer.
12)  Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the 

apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury 
from tip-over.

13)  Unplug this apparatus during lightning storms or when unused for long periods of time.
14)  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any 

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15)  Operate only from the type of power source indicated on the 

marking label. If you are not sure of the type of power supplied to 
your home consult your television dealer or local power company.

16)  Follow all warnings and instructions marked on the LCD TV.
17)  Never push objects of any kind into this LCD TV through cabinet 

slots as they may touch dangerous voltage points or short out 
parts that could result in a fire or electric shock. Never spill liquid 
of any kind on the LCD TV.

18)  If an outside antenna is connected to the television equipment, 

be sure the antenna system is grounded so as to provide some 
protection against voltage surges and built up static charges. 
In the U.S. Section 810-21 of the National Electrical Code 
provides information with respect to proper grounding of the mast 
and supporting structure, grounding of the lead-in wire to an 
antenna discharge unit, size of grounding conductors, location of 
antenna discharge unit, connection to grounding electrodes, and 
requirements for the grounding electrode.

19)  An outside antenna system should not be located in the vicinity of overhead power lines, other electric light, power circuits, 

or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be 
taken to keep from touching such power lines or circuits as contact with them might be fatal.

20)  Unplug this LCD TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:
 

a. 

When the power cord or plug is damaged or frayed.

 

b. 

If liquid has been spilled into the LCD TV.

 

c. 

If the LCD TV has been exposed to rain or water.

 

d. 

If the LCD TV does not operate normally by following the operating instructions.

 

 

 

 Adjust only those controls that are covered by the operating instructions as improper adjustment of 
other controls may result in damage and will often require extensive work by a qualified technician to 
restore the LCD TV to normal operation.

 

e. 

If the LCD TV has been dropped or the cabinet has been damaged.

 

f. 

When the LCD TV exhibits a distinct change in performance - this indicates a need for service.

21)  When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that 

have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.

22)  WARNING:  TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN,

23)  WARNING:  SMALL PARTS CAN PRESENT CHOKING HAZARD IF ACCIDENTALLY SWALLOWED. KEEP SMALL 

24)  WARNING:  To prevent the spread of fire, keep candles or other open flames away from this product at all 

25)  CAUTION:  The Power switch on this unit will not completely shut off all power from AC outlet. Since the power 

cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to 
shut down all power.
Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from AC outlet 
in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when 
left unused for a long period of time (for example, when on vacation).

26)  CAUTION:  TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS PLUG WITH A RECEPTACLE OR OTHER OUTLET 

UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

27)  CAUTION:  USE WITH OTHER STAND MAY RESULT IN INSTABILITY POSSIBLY CAUSING INJURY.
28)  CAUTION:  DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME 

OR EQUIVALENT TYPE.

29)  CAUTION:  This LCD TV is for use only with the following optional accessory. Use with any other type of optional 

accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Panasonic Corporation)
•  Wall-hanging bracket:  TY-WK3L2RW

Always be sure to ask a qualified technician to carry out set-up.

NOTE:   This equipment is designed to operate in North America and other countries where the broadcasting system and AC 

house current are exactly the same as in North America.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur 
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 
measures:
 

• Reorient or relocate the receiving antenna.

 

• Increase the separation between the equipment and receiver.

 

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may 
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 
undesired operation.

Responsible Party:

Panasonic Corporation of North America
Three Panasonic Way, 2F-5, Secaucus, NJ 07094

Contact Source:

Panasonic System Communications Company of North America
1-800-973-4390

 TY-WK3L2RW

Please contact your nearest Panasonic dealer to purchase the recommended 
wall-hanging bracket. For additional details, please refer to the wall-hanging 
bracket installation manual.

Holes for wall-hanging bracket 
installation

Screw for fixing the TV onto the 
wall-hanging bracket
(not supplied with the TV)

(View from the side)

7.9 ”

(200 mm)

7.9 ”

(200 mm)

  Customer assumes liability if mounting the unit themselves or if a Panasonic bracket is not used. Any damage resulting 

from not having a professional installer mount your unit will void your warranty.

  Always be sure to ask a qualified technician to perform any necessary set-up. Incorrect fitting may cause equipment to 

fall, resulting in injury and product damage.

  Do not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) which typically give off 

high heat. Doing so may warp or damage plastic cabinet parts.

  Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall 

before hanging bracket.

  When using an angled-type wall hanging bracket, please ensure that there is sufficient space for the connecting cables 

so that they do not press against the wall when the TV is tilted forward.

  For safety reasons, remove units no longer being used from their wall-mounted locations.

Remote Control
Transmitter

 N2QAYB000485

Batteries for the
Remote Control
Transmitter (2)

 AA Battery

Operating Instructions

Open

Hook

Note the correct polarity
(+ or -).

Close

  Incorrect installation may cause 

battery leakage and corrosion, 
resulting in damage to the remote 
control.

• 

Do not mix old and new batteries.

• 

Do not mix different battery types (such 
as alkaline and manganese batteries).

• 

Do not use rechargeable (Ni-Cd) 
batteries.

  Do not burn or break batteries.

Pedestal

 

  Fix securely with assembly screws 

A

. (Total 4 screws)

 

  Tighten screws firmly.

A

Bracket

Front

Base

 

  Fix securely with assembly screws 

C

. (Total 4 screws)

 

 is used as security screw if necessary.

 

 

Tighten screws firmly.

B and C

B and C

Foam mat or thick 
soft cloth

  Otherwise the TV may fall over and become damaged, and personal injury may result.

  Otherwise the TV may fall over and become damaged, and personal injury may result.

  If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic 

Dealer immediately.

  If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong 

enough to support the TV, and it might fall over and become damaged, and personal injury may result.

If you need more information.
Please visit the Panasonic website 
http://panasonic.net/

TQB2AA0655-1

ANTENNA
LEAD-IN WIRE

ANTENNA
DISCHARGE UNIT 
(NEC SECTION 810-20)
GROUNDING 
CONDUCTORS
 (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING 
ELECTRODE SYSTEM 
(NEC ART 250, PART H)

ELECTRIC 
SERVICE 
EQUIPMENT

GROUND CLAMP

EXAMPLE OF ANTENNA 
GROUNDING AS PER 
(NEC) NATIONAL 
ELECTRICAL
CODE

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, 
lintfree cloth.

  If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap diluted 

by 100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the 
display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.

  Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile 

substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

  If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the cloth dry. Use this cloth to 

wipe the cabinet and then wipe it dry with a dry cloth.

  Do not allow any mild liquid dish soap to come into direct contact with the surface of the LCD TV. 

If water droplets get inside the unit, operating problems may result.

  Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet 

surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with 
articles made from rubber or PVC.

 Cleaning

Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small 
amount of mild liquid dish soap has been added and then wipe with a dry cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating. 
(If using a chemically-treated cloth, follow the instructions supplied with the cloth.)

  Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with 

rubber, vinyl products, or the like. (Doing so will cause deterioration.)

Wipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.)

•  The home theater entertainment experience is a growing trend 

and larger flat panel displays are popular purchases. However, 
flat panel displays are not always supported on the proper stands 
or installed according to the manufacturer’s recommendations.

•  Flat panel displays that are improperly situated on dressers, 

bookcases, shelves, desks, speakers, chests or carts may fall 
over and cause injury.

•  The consumer electronics industry is committed to making home 

entertainment enjoyable and safe.

•  One size does NOT fit all. Follow the manufacturer’s 

recommendations for the safe installation and use of your flat panel 
display.

•  Carefully read and understand all enclosed instructions for proper 

use of this product.

•  Don’t allow children to climb on or play with furniture and television 

sets.

•  Don’t place flat panel displays on furniture that can easily be 

used as steps, such as a chest of drawers.

•  Remember that children can become excited while watching a 

program, especially on a “larger than life” flat panel display. Care 
should be taken to place or install the display where it cannot be 
pushed, pulled over, or knocked down.

•  Care should be taken to route all cords and cables connected to 

the flat panel display so that they cannot be pulled or grabbed by 
curious children.

•  Use a mount that has been recommended by the display 

manufacturer and/or listed by an independent laboratory (such as 
UL, CSA, ETL).

•  Follow all instructions supplied by the display and mount 

manufacturers.

•  If you have any doubts about your ability to safely install your flat 

panel display, contact your retailer about professional installation.

•  Make sure that the wall where you are mounting the display is 

appropriate.
Some wall mounts are not designed to be mounted to walls with 
steel studs or old cinder block construction. If you are unsure, 
contact a professional installer.

•  A minimum of two people are required for installation. Flat panel 

displays can be heavy.

Assembly screws 

A

Screws (4)

 

 XSS4+16FJK
  size (M4 × 16)

B

Security screw (1)

 THE2AC004J
  size (M4 × 12)

C

Screws (4)

 XYN4+F12FJK
  size (M4 × 12)

Bracket (1)

  TBL4GA3014 (TH-32LRU50)
  TBL2AA3005 (TH-37LRU50)
  TBL2AA3006 (TH-42LRU50)

 Base (1)

  TBL2AX00501A (TH-32LRU50)
  TBL2AX00511 (TH-37LRU50)
  TBL2AX00521 (TH-42LRU50)