Panasonic th-42pwd4bx User Manual

Select Signal from the “Setup” menu during RGB or PC input signal mode.

Press to select each item.

Press to adjust.

The following operation methods are the same for both the Signal [RGB]
and Signal [PC].

Sync

H & V

Sync

on  VIDEO

Sync

on  G

Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT).

H&V:

The H and V sync signals are input from the HD/VD connector.

on G:

Uses a synchronized signal on the Video G signal, which is input
from the G connector.

on VIDEO: Compatible with the scart plug (Europe)

The composite video signal input from the VIDEO input terminal is
used by dividing the sync signals.

(This setting is the same for both Signal [RGB] and Signal [PC].)

Confirm that the input is set to PC INPUT (this setting is valid only for PC INPUT).

H&V: The H and V sync signals are input from the HD/VD connector.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.

Pull-in  range

Wide

Pull-in  range

Narrow

This display is valid only for RGB input and PC input.
Display range:

Horizontal 15.5 - 110 kHz
Vertical 48 - 120 Hz

H-Freq.                 kHz
V-Freq.                  Hz

31.5

60.0

The following operation methods are the same for “Signal” menu during
Component, RGB and PC input signal mode.
Normally, these adjustments are set to appropriate levels and therefore, do not
need to be altered.

Clamp position

Signal

[  RGB  ]

Sync
Pull-in  range

H-Freq.                 kHz
V-Freq.                  Hz

H & V

Narrow

31.5

60.0

Clamp position

Signal

[  PC  ]

Sync
Pull-in  range

H-Freq.                 kHz
V-Freq.                  Hz

H & V

Narrow

31.5

60.0

CLamp position

Signal

[  Component  ]

Clamp  position