Panasonic th-42phd6ex User Manual
32
Select Signal from the “Setup” menu during RGB input signal.
Press to adjust.
Setting RGB sync signal:
Confirm that the input is set to RGB input (this setting is valid only for RGB input
signal).
signal).
H & V:
The H and V sync signals are input from the HD/VD connector.
on G:
Uses a synchronized signal on the Video G signal, which is input
from the G connector.
from the G connector.
CS:
Uses a synchronized signal of Composite Sync input.
Displays the H (Horizontal)/V (Vertical) frequencies.
This display is valid only for RGB/PC and DVI input signal.
Display range:
Display range:
Horizontal
15 - 110 kHz
Vertical
48 - 120 Hz
H-Freq. (kHz)/V-Freq. (Hz)
Setup for input signals
Sync
Press to exit from adjust mode.
Press
(ACTION) button
Sync
H & V
Sync
CS
Sync
on G
H-Freq. kHz
V-Freq. Hz
V-Freq. Hz
31.5
60.0
Signal
[ RGB ]
Sync
H-Freq. kHz
V-Freq. Hz
V-Freq. Hz
H & V
31.5
60.0
R
Setup
1/2
Signal
Screensaver
Input label
Component/RGB-in select
RGB
RGB1
OSD Language
English (UK)
Power save
Off
Standby save
On
Power management
Off
Note:
Sync cannot be adjusted while a DVI signal is being applied.
Sync cannot be adjusted while a DVI signal is being applied.