Panasonic th-42px25up User Manual

Cable Connection

PC Input Terminals Connection

Notes:
(1) Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical

scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200
lines.)

(2) The maximum resolution:

If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity.

(3) Some PC models cannot be connected to the set.
(4) There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal.
(5) The computer shown in the illustration is for example purposes only.
(6) Additional equipment and cables shown are not supplied with this set.
(7) Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified

frequency range.

S VIDEO

VIDEO

INPUT 3

L AUDIO R

Signal Names for D-sub 15P Connector

Pin Layout for PC Input
Terminal

Pin No.

Signal Name

NC (not connected)

GND (Ground)

Pin No.

Signal Name

GND (Ground)

NC (not connected)

GND (Ground)

Signal Name

NC (not connected)

HD/SYNC

Model

TH-37PX25

TH-42PX25
TH-50PX25

4:3

768

× 720

768

× 768

1,024

× 768

16:9

1,024

× 720

1,024

× 768

1,366

× 768

Aspect

COMPUTER

Ferrite core (small size)

(supplied)

Less than
4” (10 cm)

Audio

Stereo plug

Connect a cable which matches
the audio output terminal on the computer.

Conversion adapter
(if necessary)

Less than
4” (10 cm)

RGB

PC cable

Less than
4” (10 cm)

D-sub 15p

Ferrite core (large size)
(supplied)