Panasonic th-50pb2w User Manual
34
Set Touch Pen mode.
Select “Touch-Pen Settings” in “Setup” menu and press
button.
When a Terminal Board with dual input terminals is installed, “SLOT INPUT” is
displayed as “SLOT INPUT A” and “SLOT INPUT B”.
displayed as “SLOT INPUT A” and “SLOT INPUT B”.
Touch-Pen Settings
Off
COMPONENT
HDMI
HDMI
Off
VIDEO
Off
SLOT INPUT
Off
Off
Off
Off
NETWORK
Off
Detected
Standby pen charging mode
Pen adapter status
Pairing
DVI
PC
PC
Off
Touch-Pen Settings
Touch-Pen Mode
Touch Only
WHITEBOARD function
Off
Quick WHITEBOARD launch
Off
Touch-Pen Mode
Select an appropriate setting for the function of the electronic pen used.
Touch Only: Contact-type Touch Pen
Touch & Remote: Contact-type Touch Pen and remote pointer
Select an appropriate setting for the function of the electronic pen used.
Touch Only: Contact-type Touch Pen
Touch & Remote: Contact-type Touch Pen and remote pointer
WHITEBOARD function
Sets the built-in WhiteBoard (WhiteBoard mode) function. When this is set to “On”, the built-in WhiteBoard function is
enabled and the WHITEBOARD input can be selected.
Quick WHITEBOARD launch
When this is set to “ON”, the built-in WhiteBoard will be in the standby mode when the plasma display is in the standby
mode (power OFF with remote control) and the start up is quicker.
Note:
This setting is automatically turned “On” and cannot be changed in the following cases.
When the power is supplied to the slot
When “Control I/F Select” is set to “LAN”
When “WEB Control” is set to “On”
When “Standby pen charging mode” is set to “On”
When “Standby pen charging mode” is set to “On”
SLOT INPUT – NETWORK
Set “On” or “Off” for each input terminal.
If you switch to the input terminal that is set to “On”, the mode becomes Touch Pen
mode.
“Touch-Pen: On” is displayed in Touch Pen mode.
Notes:
• The picture quality changes according to the settings of “Touch-Pen Mode” and On/Off state of each input
Set “On” or “Off” for each input terminal.
If you switch to the input terminal that is set to “On”, the mode becomes Touch Pen
mode.
“Touch-Pen: On” is displayed in Touch Pen mode.
Notes:
• The picture quality changes according to the settings of “Touch-Pen Mode” and On/Off state of each input
terminal.
• The electronic pen cannot be used during Digital Zoom. (see page 20)
• When using the electronic pen, adjust “Pos./Size” so that the screen of the computer can be correctly displayed.
• When using the electronic pen, adjust “Pos./Size” so that the screen of the computer can be correctly displayed.
(see page 23)
Setting the Remote Control
You can also turn Touch Pen mode On/Off with the FUNCTION buttons on the remote control. (see page 44)
You can also turn Touch Pen mode On/Off with the FUNCTION buttons on the remote control. (see page 44)
In Touch Pen mode, the menus and functions are restricted as follows.
Pos./Size menu
1:1 Pixel Mode: On
Over scan: Off
Over scan: Off
Picture menu
Picture Mode: “Normal” or “Dynamic” only. (see page 26)
Setup menu
Extended life settings
Picture Mode: “Normal” or “Dynamic” only. (see page 39)
Options menu
Display size: Unavailable
Rotate: Unavailable
Rotate: Unavailable
ASPECT Controls
16:9
On
Touch-Pen
Pen adapter status
Not detected: Electronic pen adapter is not connected.
Confi rming...: Immediately after connecting an electronic pen adapter and the
built-in WhiteBoard “Easy WhiteBoard” is starting up.
Detected: Electronic pen adapter is connected.