Panasonic th85pb1u User Manual

Set Touch Pen mode.

Select “TOUCH-PEN SETTINGS” in “SETUP” menu and press 

 button.

When a Terminal Board with dual input terminals is installed, “SLOT INPUT” is 
displayed as “SLOT INPUT A” and “SLOT INPUT B”.

OFF

SLOT INPUT
HDMI

OFF

OFF
OFF

NETWORK

DVI
PC

OFF

TOUCH-PEN SETTINGS

TOUCH-PEN MODE

TOUCH ONLY

TOUCH-PEN MODE
Select an appropriate setting for the function of the electronic pen used.
TOUCH ONLY: Contact-type Touch Pen
TOUCH & REMOTE: Contact-type Touch Pen and remote pointer
SLOT INPUT NETWORK
Set “ON” or “OFF” for each input terminal.
If you switch to the input terminal that is set to “ON”, the mode becomes Touch Pen mode. 
“TOUCH-PEN: ON” is displayed in Touch Pen mode.
Notes:
•  When the following signal input, “TOUCH-PEN SETTINGS” are disabled:

50i/50p/25p/24sF/24p signals and PC format signals with 50 Hz vertical frequency.

•  The electronic pen cannot be used when VIDEO or COMPONENT input is selected.
•  The electronic pen cannot be used during Digital Zoom. (see page 22)
•  When using the electronic pen, adjust “POS./SIZE” so that the screen of the computer can be correctly displayed. 

(see page 24)

Setting the Remote Control
You can also turn Touch Pen mode ON/OFF with the FUNCTION buttons on the remote control. (see page 43)

1:1 PIXEL MODE: ON
OVER SCAN: OFF

PICTURE MENU: Fixed to “STANDARD”
(see page 27)

FRAME CREATION: OFF
PICTURE MENU: Fixed to “STANDARD” 
(see page 38)
MULTI DISPLAY SETUP: OFF
PORTRAIT SETUP: OFF

Display size: Unavailable
Rotate: Unavailable

FULL

ON

TOUCH-PEN