Panasonic th65phd8bk User Manual

Requires two R6 batteries.
1. Turn the transmitter face down.

Press and slide off the battery 
cover.

2. Install the batteries as shown in the 

battery compartment. (Polarity + or 
– must match the markings in the 
compartment.)

3. Replace the cover and slide in 

reverse until the lock snaps.

For frequent remote control users, replace old batteries with Alkaline 
batteries for longer life.

Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precaution:
1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when remote control acts sporadically or stops operating the Plasma Display set.

“R6 (UM3)” size

+

+

-

-

Power supply cord

Fixing bands × 2

Batteries for the Remote 
Control Transmitter
(2 × R6 (UM3) Size)

Remote Control Transmitter

EUR7636090R

Operating Instruction book