Panasonic tu-pt700u User Manual

For your convenience, First Time Setup menu will be displayed on screen when the
set is turned on for the first time. If needed, follow the menus and procedures displayed
on-screen for setting up the features.
You can also make the settings in Setup menu (see pages 36-38).

Select the configuration of RF input depending on the
signal source.

Press to select Input Setup.

Press to select Cable only,
Cable/Antenna or Antenna
only.

Press to enter your selection.

This feature allows you to selectively auto scan channels.
You can scan All, Analog only channels or Analog & Digital
channels.

Notes:
• If the EXIT button is pressed at anytime during Auto Scan,

Auto Scan will be cancelled and the TV will return to the
First Time Setup menu.

• If a CableCARD

TM 

is present during the First Time Setup

and Antenna (A) is set to cable, Antenna (A) will not be
scanned due to the CableCARD

TM

 providing the channel

map.

Press to select the sub-menu.

Press to start Auto Scan.
After Auto Scan is completed,
the TV tunes to the first channel
found during Auto Scan.

Press to select Auto Scan.

Press to enter the sub-menu
field.

Press  

Press   

Press to start the Auto Scan.
All available channels with a signal will be
programmed into memory.

Allows you to select the language used for On Screen
Displays.

Press to select Language.

Press to enter the sub-menu
field.

Press to select the Language.

Press to enter your selection.

English

Spanish

French