Panasonic tu-pt700u User Manual

You can operate other manufacturers’ components using this TV’s remote control.

•

 Connect the plug of the external component to the wall outlet.

•

 Make sure the component is turned off.

  +  

Press and hold POWER and OK together, for at least
5 seconds.

•

 The mode selection buttons flashes, and then  release

the POWER and OK.

Select the type of the component.

•

 The selected button light and all others go out.

Enter the 3-digit infrared code (see pages 60-62).

•

 Factory default setting : Panasonic

•

 Press POWER to test the operation.

Notes:
• If the component does not operate with the Remote Control, repeat the procedure

using another code. (Some brands have multiple codes).

• If an incorrect code is entered, or if the procedure takes longer than 30 seconds,the

programming will fail.

After selecting the type of component (step 2, above)

Press to store the code.

Press to select the code.
• The code starts from the current device.
• Press POWER button to test the operation.
• Repeat the steps until the component code is found.

It may take many attempts before the correct code is
found.