Panasonic tx-15lv1 User Manual
8
Quick start Guide
1. Choose Your Connection Type
LCD TV
Clamper
Aerial input socket
Aerial socket
Aerial
(Not Supplied)
(Not Supplied)
Aerial lead
LCD TV
Aerial
(Not Supplied)
(Not Supplied)
Mains
Socket
Socket
RF OUT
VCR
RF IN
Clamper
21-pin SCART cable
(Not Supplied)
(Not Supplied)
Aerial
Input
socket
Input
socket
or
1. Connecting the TV directly to an aerial only
Connect the aerial lead into the TV aerial socket (
).
2. Connection of TV and VCR using Scart
and RF
RF Connection
Connect the AERIAL to the Aerial In socket of the
VCR and an RF cable from the VCR Aerial Out
socket to the TV Aerial socket (
Connect the AERIAL to the Aerial In socket of the
VCR and an RF cable from the VCR Aerial Out
socket to the TV Aerial socket (
).
Scart Connections
The VCR can also be connected to the TV using
a Scart cable.
Connect AV1 of the VCR to AV1 Scart socket of
this set.
The VCR can also be connected to the TV using
a Scart cable.
Connect AV1 of the VCR to AV1 Scart socket of
this set.
Note:
Further details of audio / video / satellite receiver
connections can be found on pages 33 and 34.
Further details of audio / video / satellite receiver
connections can be found on pages 33 and 34.
Using the Cable Cover
4. Installing the cable cover
3. Connect the antenna cable to RF in terminal.
2. Using the cable clamp
Insert the 2 upper claws into
the mating slots.
Press in the bottom section
of the cover.
the mating slots.
Press in the bottom section
of the cover.
Removing the Cable Cover
Release the 2 lower claws
from their slots.
Slowly pull the cover downward.
from their slots.
Slowly pull the cover downward.
Claw
1. Installing the cable clamp.
Coaxial cable
Open the cable clamp
and pass the antenna
cable through.
and pass the antenna
cable through.