Panasonic tx-20la6p User Manual

1

N

2

3

4

5

6

7

8

9

C

0

3

•  This TV set is designed to operate on AC 220-240 V, 50 Hz.
•  To prevent damage which might result in electric shock or 

fire, do not expose this TV set to rain or excessive moisture. 
This TV must not be exposed to dripping or splashing water 
and objects filled with liquid, such as vases, must not be placed 
on top of or above the TV.

•  Keep unneeded small parts and other objects out of the reach 

of small children. These objects can be accidentally swallowed. 
Also, be careful about packaging materials and plastic sheets.

•  Use only the accessories appropriate to handling with fragile 

products.

•  To prevent injury, this apparaturs must be securely attached 

to the floor/wall in accordance with installation instructions 
(mounting bracket is not supplied) .

•  Using an unauthorized stand or other fixtures may make the 

TV unstable, risking injury. Be sure to ask your local Panasonic 
dealer to perform setup.

Do not remove the rear cover as live parts are accessible 
when it is removed. There are no user serviceable parts inside. 
Ensure that the mains plug is easily accessible.

 
  TV Games / Home Computers
•  Extended use of TV games or home computers with 

any television set can cause a shadow on the screen. 
This type of LCD panel phenomenon, can be limited by ob-
serving the following points:

•  Reduce the brightness and contrast levels to a minimum view-

ing level.

•   Do not operate the television set for a continuous period of 

time while using TV games or home computers.

•  Do not allow a still picture to be displayed for an extended pe-

riod, as this can cause a permanent after-image to remain on 
the LCD TV screen.

•  Examples of still pictures include logos, video games, compu-

ter images, teletext and images displayed in 4:3 mode.

•  This type of LCD panel damage, is not an operating defect, 

and as such is not covered by the Panasonic warranty.

•  Remove the mains plug from the wall socket when TV is not 

in use. Remove the mains plug from the wall socket before 
connecting or disconnecting any leads.

Sleep feature: 
If the set is not switched off when the TV station stops transmit-
ting, it will automatically go to Standby mode after 30 minutes. 
This function will not operate when the TV is in AV mode.

 Cabinet and LCD panel care 
•  Remove the mains plug from the wall socket. The cabinet 

and LCD panel can be cleaned with a soft cloth moistened 
with mild detergent and water. Do not use solutions contain-
ing benzol or petroleum.

•  When ambient temperature is cool, the picture may take a short 

time to reach normal brightness, but this is not a malfunction. 
(After brief moment, the picture will have normal brightness.)

•  Adequate ventilation is essential to prevent failure of electrical 

components, we recommend that a gap of at least 10 cm is left 
all around this television receiver even when it is placed inside 
a cabinet or between shelves.

•  Avoid exposing the TV set to direct sunlight and other sourc-

es of heat. To prevent fire, never place any type of candle or 
naked flame on top or near the TV set.

•  Ventilation should not be impleded by covering the ventilation 

openings with items such as newspapers, tablecloths and 
curtains.

Check that you have the accessories and items shown

Operating Instruction book

Remote Control Transmitter
(EUR7636080R)

Batteries for the Re mote 
Control Transmitter
(2 

× R6 (UM3) size)

Pan European 
Guarantee Card