Panasonic tx-20lb30m User Manual
6
ANT INPUT
ANT OUTPUT
AV2
IN
COMPONENT
VIDEO
Y
PB/CB
PR/CR
MONO
-L
R-AUDIO
MONITOR
OUT
AV1
IN
MONO
-L
R-AUDIO
VIDEO
S-VIDEO
Notes:
• Additional equipment, cables and adapter plugs shown are not supplied with this TV set.
• To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ω coaxial) and the correct terminating
• Additional equipment, cables and adapter plugs shown are not supplied with this TV set.
• To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ω coaxial) and the correct terminating
plug are required.
• If a communal Aerial system is used, you may require the correct connection cable and plug between the wall
Aerial socket and your TV.
• Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for
your particular area and the accessories required.
• Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the Customer.
For proper reception of VHF / UHF channels, an external antenna is required. For best reception, an outdoor
antenna is recommended.
antenna is recommended.
Antenna connection
VHF Aerial
UHF Aerial
Mixer
75 Ω Coaxial cable
VCR
OR
Power On / Off
Connect the mains plug to the wall
socket.
socket.
Press the
switch on the TV set to turn
the set on.
To switch the TV set to Standby mode,
press the
press the
button on the remote control.
The TV set can be switched on by pressing
the
the
button again if it was in Standby
mode.
Notes:
• This TV will still consume some power
• This TV will still consume some power
as long as the mains plug is still inserted
into the wall socket.
into the wall socket.
• The mains plug shown is an example.
Power Indicator
Remote control
signal sensor
signal sensor
LED Indicator
Standby
: Red
On
: No Light
1
2
3
4
6
7
8
9
0
TV
OK
5
STR
F
TV/AV