Panasonic tu-pta500u User Manual

Press the MENU button to display the PC MENU screen, and select PC
MENU.

Press to select each item.

Press to adjust.

SET UP for PC Input Signals

SIGNAL

SYNC
PULL-IN RANGE

H-FREQ. kHz
V-FREQ. Hz

H & V

NARROW

31.5

60.0

CLAMP POSITION

SELECT

CHANGE

EXIT

VOL

ACTION

SYNC

Sets the width for different frequencies.

Setting PC sync signal setting:

Confirm that the input is set to PC INPUT (this setting is valid only for PC
INPUT).

H&V: The H and V sync signals are input from the HD / VD connector.
ON G: Uses a synchronized signal on the Video G signal, which is input

from the G connector.

PULL IN RANGE

Displays the H (horizontal) / V ( vertical) frequencies.

Display range:

Horizontal 15.5 – 110 kHz
Vertical 48 – 120 Hz

H-FREQ (kHz) / V-FREQ (Hz)

CLAMP POSITION

Adjusts the clamp position.

The following operation methods are the same for “SIGNAL” menu.
Normally, these adjustments are set to appropriate levels and therefore do
not need to be altered.

SYNC

H & V

ON G

PULL-IN RANGE