Panasonic tu-pt600b User Manual
9
2. Choose Your Connection Type
Connection and setting up options
• If connecting this set using an RF cable only, see below.
• If connecting this set using Scart and RF cables, see page 10.
• If connecting this set to a Q-Link (or Q-Link compatible) VCR, see page 10.
• If connecting this set to a Q-Link (or Q-Link compatible) VCR and a satellite receiver, see page 11.
• If connecting this set using Scart and RF cables, see page 10.
• If connecting this set to a Q-Link (or Q-Link compatible) VCR, see page 10.
• If connecting this set to a Q-Link (or Q-Link compatible) VCR and a satellite receiver, see page 11.
What is Q-Link?
Q-Link allows direct communication between the set and a Q-Link (or Q-Link compatible) VCR, this will enable
features such as downloading of tuning information from the set to the VCR.
Q-Link allows direct communication between the set and a Q-Link (or Q-Link compatible) VCR, this will enable
features such as downloading of tuning information from the set to the VCR.
When using a “NEXTVIEWLINK” VCR the main features possible are the following:
• Preset Download
Downloading of tuning information from the set to the VCR.
• Direct TV Record
For immediate recording of the current program (What You See Is What You Record).
When using a “Q-Link” VCR the main features possible are the following:
• Preset Download
• Preset Download
Downloading of tuning information from the set to the VCR.
• Direct TV Record
For immediate recording of the current program (What You See Is What You
Record).
• TV/VCR Auto Power On
When the VCR plays a tape the set will automatically switch On (From Stand-
by) and select the AV2 input.
by) and select the AV2 input.
• VCR Auto Power Stand-by
When the set is switched into Stand-by, the VCR will also switch into Stand-by.
• VCR Image view On
If the set is in Stand-by mode and the VCR sends a menu to be displayed on
the TV screen (e.g. Main menu), the set will automatically switch On and the
menu will be displayed.
menu will be displayed.
This set will also communicate with other VCRs that bear the following logos:
• “DATA LOGIC”
• “DATA LOGIC”
(a trademark of Metz Corporation).
• “Easy Link”
(a trademark of Philips Corporation).
• “Megalogic”
(a trademark of Grundig Corporation).
• “SMARTLINK”
(a trademark of Sony Corporation).
These VCRs may support some or all of the above funcitons. Refer to the VCR operating instruction book.
Further information on Q-Link can be found on page 36.
In order for Q-Link to function correctly, the Scart cables must be connected in a certain way, dependent on
whether the set is being connected to a VCR or to a VCR and Satellite Receiver.
In order for Q-Link to function correctly, the Scart cables must be connected in a certain way, dependent on
whether the set is being connected to a VCR or to a VCR and Satellite Receiver.
1. Connecting this set directly to an ANTENNA only
RF connection
Connect the Antenna lead into this set
Antenna Input terminal (
Connect the Antenna lead into this set
Antenna Input terminal (
).
AV1
AV2
AV4
DISPLAY OUT
RGB
VIDEO
S-VIDEO
S-VIDEO
VIDEO
S-VIDEO
S-VIDEO
RGB
VIDEO
VIDEO
AV1
AV2
VIDEO
S-VIDEO
S-VIDEO
RGB
VIDEO
VIDEO
AV4C
VIDEO
AUDIO
P
R
P
B
Y
L
R
R
L
AUDIO OUT
ANTENNA
(Not Supplied)
(Not Supplied)
Antenna Lead
Quick start Guide