Panasonic tx-22lt2f User Manual

• Be sure to use the power cord and AC adaptor

included in the accessories.

• Do not use the AC adaptor for other than the

specified equipment.

• Unplug the AC adaptor if it is not used for long

time.

• Do not place any objects on the AC adaptor.
• Do not use the AC adaptor outdoors.
• Do not attempt to repair the AC adaptor if it is

broken or malfunctioning. Refer the servicing
to the service representative.

• Do not try to open the AC adaptor.
• Do not use water or wet cloth for cleaning the

AC adaptor.

Press the 

 switch on the LCD TV to turn

the set on.

There are two ways to switch the TV set to stand-
by mode.
(A) Press the 

  switch on the LCD TV and check

RED LED is lit.

(B) Press the 

 Stand-by button on the remote

control.

The TV set can be switched on by the remote
controller if it was switched to stand-by using
method (A) or method (B).
When programme number up ( )/down ( ) but-
tons on the side panel of the main part are
pressed in stand-by mode, TV turns on.

If the TV has not been programmed for you then
Auto setup will begin, your stations will be
located, sorted into order and stored ready for
use (refer to P22).

Land

Start ATP

Suchlauf

Abbruch

Power-Indicator
The RED LED when
indicates that not only
the TV set is in stand-
by mode but also the
external AC adaptor is
still on.

SETUP : Return to tuning menu
TV/AV

: To exit

    02                         99:21 41

AUTO SETUP IN PROGRESS

SEARCHING:

PLEASE WAIT