Panasonic tx-26lx500f User Manual

23

This function lets you display Still images (JPEG) or Moving pictures (MPEG4) recorded by this unit, DIGA, D-snap 
or digital camera on a memory card when it is inserted in the proper card slot.

• SD Card (1GB) 

• Multi Media Card (128MB)

• miniSD Card∗ (512MB)

• SD Card (1GB) 

• miniSD Card∗ (512MB)

• Multi Media Card (128MB)  • Compact Flash (1GB)
• Smart Media (128MB) 

• Memory Stick (128MB)

• xD Picture Card (512MB) 

• Flash ATA (128MB)

• Memory Stick Pro (1GB)
The cards require standard PC card adapter.
(Some PC card adapter will not be compatible.)

Label-side upward

Insert it to be 
clicked in.

Push the center 
of the card.

Turn the TV off before inserting or removing a PC 
card.

Holding both edges, 

securely insert it to 
the depth.

Align the 
direction of 

 mark.

Label-side upward

Terminal face to the 
depth.

1. Push the EJECT button pops out.
2. Push it again.

If the EJECT button does not pop out
Push in PC card again, and then push again the EJECT 
button.
Note:
If the card adapter is used, remove it together with the 
adapter.

∗

 miniSD Card requires miniSD™ adapter.

•  This function is not compatible with card type hard disk 

(Micro Drive, Mobile type hard disk, etc).

• Memory cards are not supplied with this television.
•  When both SD card and PC card are inserted in the slot, 

SD card has the priority. You can change the priority. 
See page 28.

Note: 
Suitable SD Memory Cards
Please confi rm the latest information on the following 
website.
http://panasonic.co.jp/pavc/global/cs
(This site is in English only)

•  Do not remove the card or turn the unit off while the unit 

is accessing the information. Such action may damage 
the memory card or the unit itself.

• The blue LED lights during recording.
• Before inserting or removing the PC card, make sure 

that the TV is turned Off. Otherwise, it may damage the 
unit.

•  Do not touch the terminals on the back of the SD card/PC 

card.

• Always insert a card in the correct direction. Failure to 

do so may result in damage to the card and this unit.

•  Do not subject the card to excessive pressure or strong 

impacts.

• Electrical interference, electrostatic discharges and 

malfunctions of the unit or card may all result in data 
loss or damage to the card.

• Stored data should be periodically backed up as a 

protection against data corruption, data loss or device 
malfunction. Please note that our company shall not 
accept any liability for damage or loss of stored data.