Panasonic tx-22lt2m User Manual
16
1
Press to select MANUAL TUNE.
Press to access MANUAL TUNE.
2
Press to select the desired Programme Number.
Press to search the higher or lower channel.
3
When the desired station is found, press to store.
The programme position will flash.
The programme position will flash.
Press at any time to go back to watching TV.
SYS SELECT
SOUND SYS
COLOUR SYS
COLOUR SYS
5.5MHz
SKIP
OFF
AUTO
ASIA/M. EAST
CH SELECT
DIRECT
FINE TUNE
TUNING MENU
AUTO TUNE
ACCESS
MANUAL TUNE
TUNING MENU
MANUAL TUNE
Before MANUAL TUNE, set the “CH SELECT” and “SYS SELECT”.
Follow the step on page12 to display the TUNING MENU screen.
Follow the step on page12 to display the TUNING MENU screen.
E X I T
RETURN
TV/AV
SEARCH – /+
PROGRAMME – /+
BUTTON STORE
’STR’
MANUAL TUNE
CH 2
2
MANUAL TUNE (via side panel)
It is also possible to use the control panel buttons on the side of the TV to tune individual programme positions.
CH 2
5.5 MHz
2
MANUAL TUNE (SIDE PANEL)
— / + : SEARCH
TV/AV : MOVE CURSOR
STR : TO STORE
TV/AV : MOVE CURSOR
STR : TO STORE
F : TO EXIT
1
Press
(Side panel) until Tuning mode is reached.
2
Press
or
to access Tuning mode.
3
Press
to move between Change programme, Search and Change
TV system.
4
Press
or
to change programme position or start search.
When the desired station is found, press
to store.
The programme position will flash.
Repeat above procedure to tune additional programme positions.
Repeat above procedure to tune additional programme positions.
Press
at any time to exit the Tuning menu.
1. If a clear picture cannot be obtained even when a Broadcast or AV signal is received, refer to the “Colour System Selection”
operation on page 14.
2. After the Manual tune is finished, press the Programme Number “Up” Button to confirm the tuning condition for each
Programme Numbers. If some Programme Numbers are unused, it is possible to skip such Programme Numbers.
3. When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as indicated
in the instruction manual of VCR and to set the designated channel to programme No.“0”. In that case, perform manual tune
after setting the colour system and sound system in advance. Further, in multi-system VCR, it is more convenient to set the
designated channel to several programme Numbers.
after setting the colour system and sound system in advance. Further, in multi-system VCR, it is more convenient to set the
designated channel to several programme Numbers.
Helpful Hint
PICTURE
SOUND
SET UP
TV/AV
STR
HELP
TV/AV