Panasonic tx-22lt2m User Manual
6
Quick start Guide
2. Connecting the AC Adaptor
2
1
3
1
Connect the mains lead to the AC Adaptor.
2
Connect the AC Adaptor DC plug to the DC IN
socket.
3
Plug into household mains socket.
• Be sure to use the power cord and AC adaptor
included in the accessories.
• Do not use the AC adaptor for other than the
specified equipment.
• Unplug the AC adaptor if it is not used for long
time.
• Do not place any objects on the AC adaptor.
• Do not use the AC adaptor outdoors.
• Do not attempt to repair the AC adaptor if it is
• Do not use the AC adaptor outdoors.
• Do not attempt to repair the AC adaptor if it is
broken or malfunctioning. Refer the servicing
to the service representative.
to the service representative.
• Do not try to open the AC adaptor.
• Do not use water or wet cloth for cleaning the
• Do not use water or wet cloth for cleaning the
AC adaptor.
3. Switch TV ON
Power-Indicator
The RED LED when
lit indicates that not
only the TV set is in
stand-by mode but
also the external AC
adaptor is still on.
The RED LED when
lit indicates that not
only the TV set is in
stand-by mode but
also the external AC
adaptor is still on.
TX-22LT2
Press to turn the set on.
IMPORTANT NOTES
There are two ways to switch the TV set to stand-
by mode.
by mode.
(A) Press the
switch on the LCD TV and check
RED LED is lit.
OR
(B) Press the
Stand-by button on the remote
control.
The TV set can be switched on by the remote
controller if it was switched to stand-by using
method (A) or method (B).
When programme number up ( )/down ( )
buttons on the side panel of the main part or
on the remote control are pressed in stand-by
mode, TV turns on.
controller if it was switched to stand-by using
method (A) or method (B).
When programme number up ( )/down ( )
buttons on the side panel of the main part or
on the remote control are pressed in stand-by
mode, TV turns on.