Panasonic tx-26lxd70 User Manual
38
GUIDE
INPUT
RETURN
MENU
OK
ASPECT
OPTION
VCR
1
3
2
4
6
5
7
9
8
0
EXIT
DIRECT TV REC
DIRECT TV REC
Q-Link Functions
Q-Link connects the TV and VCR / DVD recorder, enables easy recording and playback.
Ŷ
Condition
Ŷ
Features available
Some recording equipments are not applicable. Read the manuals of the equipment.
What you
see is
What you
record
see is
What you
record
Information
/ Message
/ Message
Power
on link
and Easy
playback
on link
and Easy
playback
Power off
link
link
Recording information or if recording is not possible, a message is displayed.
(Only when the programme number is “0” or “AV mode” for some equipment.)
(Only when the programme number is “0” or “AV mode” for some equipment.)
When VCR or DVD recorder starts playback or direct navigator / function menu
for the equipment are activated, the TV is turned on and input mode is switched
automatically so that you can view the content. (Only when TV is in Standby mode.)
for the equipment are activated, the TV is turned on and input mode is switched
automatically so that you can view the content. (Only when TV is in Standby mode.)
When TV is set to Standby mode, the recording equipment is also automatically
set to Standby. (Only when the videocassette or DVD is not active.)
set to Standby. (Only when the videocassette or DVD is not active.)
•
Use the VCR / DVD recorder with the following logos:
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic”, or “SMARTLINK”
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic”, or “SMARTLINK”
•
Connect the equipment to this TV’s AV1 or AV2 terminal via a “fully-wired” SCART cable. (p. 42)
•
Q-Link terminal setup in Setup menu (Q-Link, AV1 / AV2 out). (p. 23)
Direct TV Recording:
Recording the current programme in VCR / DVD recorder
immediately.
Recording the current programme in VCR / DVD recorder
immediately.
Ŷ
To change DVB channel, stop recording
EXIT
•
When Direct TV Recording is performed, the
recording equipment is automatically turned on if it
is in Standby mode.
recording equipment is automatically turned on if it
is in Standby mode.
•
The recording equipment is recording from its own
tuner. You can turn the TV off during recording
(Analogue only).
tuner. You can turn the TV off during recording
(Analogue only).
•
If you turn the TV off during recording from an AV
source, the recording will be stopped.
source, the recording will be stopped.
•
When Direct TV Recording is performed while
watching DVB channel, the DVB programme
position is locked and no other DVB channel can
be selected. However you can watch analogue
channels.
watching DVB channel, the DVB programme
position is locked and no other DVB channel can
be selected. However you can watch analogue
channels.
• “DATA LOGIC” (a trademark of Metz Corporation)
• “Megalogic” (a trademark of Grundig Corporation)
• “Easy Link” (a trademark of Philips Corporation)
• “SMARTLINK” (a trademark of Sony Corporation)
Read the manuals of the equipment too.
Ŷ
Download analogue channel settings
•
Perform Auto Setup. (p. 30)
When first using this TV, see “Auto Setup”. (p. 10)
•
Perform download to the equipment. (p. 23)