Panasonic tx-26lm70l User Manual

•

How to Use Menu Functions

(picture, sound quality

, etc.)

•

In AV mode, the Sound menu and Setup menu give a reduced number of options.

Selects four different screen settings (Dynamic / Normal / Cinema / Auto)

In each Viewing mode setting, Contrast, Brightness, Colour, Sharpness, Tint (in NTSC only), Colour 

balance, P-NR and 3D-COMB can be adjusted and stored to suit your particular 

viewing requirement (e.g., you may require different settings for viewing sports, fi lms, news etc.)

Changes to any settings in a viewing mode will affect all signal sources: RF, AV1, AV2, AV3, Component and HDMI1,2.

Changes will be stored automatically. By analysing and processing the incoming 

picture, all four modes feature automatic enhancement.

Increases or decreases the levels of these options according to your personal preference

With an NTSC signal source connected to the TV, the picture hue can be adjusted to suit your taste

Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)

Picture Noise Reduction
Automatically reduces unwanted picture noise (Off / Min / Mid / Max)

•

Not valid on HDMI and HD signal

Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen
Set to On to display sharper and more accurate colours (Off / On)

•

For PAL or NTSC signal reception only 

•

Not valid on RGB, S-Video, components and HDMI

Increases or decreases level to enhance or minimise lower, deeper sound output 

Increases or decreases level to enhance or minimise sharper, higher sound output 

Adjusts volume level of right and left speakers

Adjusts the volume of the headphones 

NICAM (Near Instantaneous Companded Audio Multiplex)

A format for digital sound over television

Reproduces stereo sound (Off / On)

•

Off if reception is poor (FM monaural sound)

Sound quality can be improved when watching music scene or drama (Music / Speech)

Provides a dynamic enhancer to simulate improved spatial effects (Off / On)

Select to fi t the input signal 
(Auto / Digital / Analogue) (p. 23)
Auto 

: Automatic detection of digital or analogue sound source

Digital 

: HDMI cable connection

Analogue : HDMI-DVI adapter cable connection

•

HDMI input mode only

•

HDMI2 terminal is for digital signal only

•

No setting for HDMI2 available

VIERA Link function (Off / On) (p. 24)

Selects which AV terminal is to be used for data communication between this TV and a 
compatible recording equipment (AV1 / AV2) (p. 22)

Chooses the signal to be transmitted from the TV to Q-Link (TV / AV2 / AV3 / Monitor)

•

Monitor: Image displayed on screen 

•

Component and HDMI signals cannot be outputted

Chooses the signal to be transmitted from the TV to Q-Link (TV / AV1 / AV3 / Monitor)

•

Monitor: Image displayed on screen 

•

Component and HDMI signals cannot be outputted

Teletext display mode (FASTEXT / List) (p. 12)

Sets the time the unit automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90) (minutes)

Adjusts volume for AV and HDMI mode

Set to "TV" to view picture from TV tuner.

Set to "AV" to view input from an external equipment connected to a SCART terminal, e.g. satellite receiver 

•

The external equipment must be switched on and sending a control signal for 

automatic switching at power on to occur

Edits channels (p. 19)

Sets channels automatically (p. 19)

Sets channels manually (p. 19)

Fine tuning of channels (during rain, etc.)

Inputs the owner ID (p. 21)

Resets all settings, for example, when moving (p. 20)

17