Panasonic tx-32le7l User Manual

22

Q-Link interlocks the TV unit and VCR / DVD recorder, enables easy recording and playback.

Recording information or if recording is not possible, a message is displayed. 
(Only when the programme number is "0" or "AV mode" for some equipment.)

When VCR or DVD recorder starts playback or direct navigator or function 
menu are activated, the TV is turned on and input mode is switched 
automatically so that you can view the content. (Only when TV is in Standby 
mode.)

When TV is set to Standby mode, the recording equipment is also automatically 
set to Standby. (Only when the videocassette or DVD is not active.)

•

Use the VCR / DVD recorder with the following logos:
"Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic", or "SMARTLINK"

•

Connect the equipment to this unit’s AV1 or AV2 terminal via a "fully-wired" SCART cable. (p. 28)

•

Q-Link terminal setup in Setup menu (Q-Link, AV1/AV2 out). (p. 18)

DIRECT TV REC

DIRECT TV REC

Recording the current programme in VCR / DVD recorder immediately.

•

When Direct TV Recording is performed, the 
recording equipment is automatically turned on if it 
is in Standby mode.

•

The recording equipment is recording from its own 
tuner. You can turn the TV off during recording.

•

If, during recording from an AV source, you turn the 
TV off or change input / programmes, the recording 
will be stopped.

• "DATA LOGIC" (a trademark of Metz Corporation) • "Megalogic" (a trademark of Grundig Corporation)
• "Easy Link" (a trademark of Philips Corporation)  • "SMARTLINK" (a trademark of Sony Corporation)

Read the manuals of the equipment too.

Some recording equipments are not applicable. Read the manuals of the equipment.

•

Perform Auto setup. (p. 21)

  When fi rst using this unit, see "Auto Setup". (p. 10)

•

Perform download to the equipment. (p. 21)