Panasonic tx-32lx60fa User Manual

3

• This TV set is designed to operate on AC 220-240 V, 

50 Hz.

•  To prevent damage which might result in elec tric shock 

or fi re, do not expose this TV set to rain or excessive 
moisture. This TV must not be exposed to dripping or 
splashing water and ob jects fi lled with liq uid, such as 
vases, must not be placed on top of or above the TV.

• Keep unneeded small parts and other objects out 

of the reach of small children. These objects can 
be accidentally swallowed. Also, be careful about 
packaging materials and plastic sheets.

• Use only the accessories appropriate to handling with 

fragile products.

• To prevent injury, this apparaturs must be securely 

attached to the fl oor/wall in accordance with installation 
instructions (mounting bracket is not supplied) . 

•  WARNING: HIGH VOLTAGE!!!
  Do not remove the rear cover as live parts are 

accessible when it is removed. There are no user 
serviceable parts inside.

  Ensure that the mains plug is easily accessible.
• TV Games / Home Computers
  Extended use of TV games or home computers with 

any television set can cause a ‘shadow’ on the screen. 
This type of LCD panel phenomenon, can be limited 
by observing the following points:

• Reduce the brightness and contrast levels to a minimum 

viewing level.

• Do not operate the television set for a continuous period of 

time while using TV games or home computers.

• Do not allow a still picture to be displayed for an extended 

period, as this can cause a permanent after-image to remain 
on the LCD TV screen. 

• Examples of still pictures include logos, video games, 

computer images, teletext and images displayed in 4:3 
mode.

• This type of LCD panel damage, is not an operating defect, 

and as such is not covered by the Panasonic warranty.

•  Remove the mains plug from the wall socket when TV 

is not in use for a prolonged period of time. Remove 
the mains plug from the wall socket before connecting 
or disconnecting any leads.

Sleep feature:
If the set is not switched off when the TV station stops 
transmitting, it will automatically go to Standby mode 
after 30 minutes. This function will not operate when 
the TV is in AV mode.
• Cabinet and LCD panel care
  Remove the mains plug from the wall socket. The 

cabinet and LCD panel can be cleaned with a soft cloth 
moistened with mild detergent and water. Do not use 
solutions containing benzol or petroleum.

• When ambient temperature is cool, the picture may 

take a short time to reach normal brightness, but this 
is not a malfunction. (After brief moment, the picture 
will have normal brightness.)

• Adequate ventilation is essential to prevent failure of 

electrical components, we recommend that a gap of 
at least 10 cm is left all around this television receiver 
even when it is placed inside a cabinet or between 
shelves.

•  Avoid exposing the TV set to direct sunlight and other 

sources of heat. To prevent fi re, never place any type 
of candle or naked fl ame on top or near the TV set.

• Ventilation should not be impleded by covering the 

ventilation openings with items such as newspapers, 
table cloths and curtains.

• Make sure that the batteries are fi tted the correct way round.
• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.
• Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni-Cd, Ni-MH) batteries.

+

+

-

-

Pull and hold the hook, then 
open the battery cover.

Insert batteries - note correct 
polarity ( + and -).

“R6 (UM3)” size

Replace the cover.