Panasonic tx-86pw200a User Manual

This remote control has been designed to work with a variety of VCRs and DVD players. In order for this to
occur, the setting for the VCR or DVD must be programmed into the Remote Control.

1.

To set a VCR, slide the remote control VCR-DVD switch 

 to VCR.

To set a DVD, slide the remote control VCR-DVD switch 

 to DVD.

2.

Push the remote control VCR-DVD Power Button 

 and keep it Pushed.

3.

Enter the Manufacturer’s two-digit code number using the remote control Number Buttons 

(The codes are shown below).

4.

Push the STOP button 

.

5.

Release the remote control VCR or DVD Power Button 

.

6.

Check the operation of the VCR or DVD. If it does not operate correctly, repeat steps 1 to 5 and use
an alternate code (if there is one).

Manufacturer

Code

Manufacturer

Code

Panasonic /

10, 11, 12, 13

NEC

40, 41, 42, 43

National

ORION

45, 46

AIWA

15, 16

Philips

50

FUJITSU

20

SANYO

55, 56, 57, 58

HITACHI

25, 26, 27

SHARP

60, 61

JVC

30, 31, 32

SONY

65, 66, 67

MITSUBISHI

35, 36

TOSHIBA

70, 71

Manufacturer

Code

Panasonic

70

1.

If the batteries are removed from the remote control the Manufacturer’s codes are lost and must be
reprogrammed.

2.

The list of manufacturer’s codes is given as a guideline only. Panasonic cannot guarantee that any
other manufacturer’s product will work with this remote control.