Panasonic vw-dtm21e User Manual
14
■ Suggestions and requirement for the
connection
● Don't turn off the digital video equipment during
the connection.
● During the connection, insert and eject the tape
with the equipment ON.
● Remove the tape when starting the software in
Camera mode.
● When disconnecting the 2 devices, disconnect
the first device, then check the connection
status before disconnecting the second one.
status before disconnecting the second one.
● When using a digital movie camera, use an AC
adapter.
● If you are unable to make the connection
properly, read the [P & S].
■ About calibration
Depending on the digital video device you use,
you might notice that some sections of the tape
are not recorded, or that some images are cut off
due to a slight timing difference in the recorded
images. Before recording the images, perform the
calibration and correct the timing. To perform the
calibration select [Equipment] from the [Tool]
Depending on the digital video device you use,
you might notice that some sections of the tape
are not recorded, or that some images are cut off
due to a slight timing difference in the recorded
images. Before recording the images, perform the
calibration and correct the timing. To perform the
calibration select [Equipment] from the [Tool]
→
[Settings] menu item. Make the corrections
manually if the calibration stops midway. (The
calibration can only be performed in the digital
video devices equipped with DV input function.)
manually if the calibration stops midway. (The
calibration can only be performed in the digital
video devices equipped with DV input function.)
%