Panasonic uf-585-595 User Manual

34

ENERGY SAVER MODE

1

 

Off

To reduce the power consumption in standby, select either Energy-
Saver or Sleep mode and specify the Delay Time (1 to 120
minutes) for the machine to enter into the selected mode.  
The Delay Timer setting is only available in the Energy-Saver or
Sleep Modes.
Off :

The unit will remain in standby mode and
consume more energy than when in Energy-
Saver or Sleep modes.

Energy-Saver Mode :Saves energy by consuming less power than

when in standby mode by turning off the
fuser unit after the specified time.

Sleep Mode :

This is the lowest power state that the
machine enters after the specified time
without actually turning off.

2

Energy-Saver

*3

Sleep

35

DAYLIGHT TIME

1

Invalid

Selecting whether the clock adjusts for Daylight Saving Time
automatically. The built-in clock will advance 1 hour at 2:00 am on
the first Sunday in April and fallback 1 hour at 2:00 am on the last
Sunday in October.

*2

Valid

36

RING PATTERN
DETECT (DRD)

(See Note 2)

*1

Invalid

All ring patterns.

2

Valid

Select a ring pattern for automatic answering.
1: A

Standard ring pattern.

2: B

Double ring pattern.

3: C

Triple ring pattern (Short-Short-Long).

4: D

All other triple ring pattern, except the type C
described above.

37

RCV TO MEMORY

(----)

Enter a 4-digit password used to print out the received document
in memory by using F8-5 (RCV TO MEMORY).  When F8-5 is set
to On, this parameter will not be shown on the LCD display.  (See
page 92)

38

ACCESS CODE

(----)

Enter a 4-digit Access Code to secure the machine from
unauthorized use.   (See page 90)

40

RELAY XMT REQUEST

*1

Invalid

Selecting whether the machine accepts and performs Relay XMT
Request.  (See page 115)

2

Valid

42

CONF. POLLED FILE 

SAVE

*1

Invalid

Selecting whether the machine saves the confidential polled file
even after the file is polled once.

2

Valid

43

PASSWORD-XMT

*1

Off

Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the receiving
station when transmitting.   (See page 101)

2

On

44

PASSWORD-RCV

*1

Off

Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving.  (See page 102)

2

On

46

SELECT RCV

*1

Invalid

Selecting whether the machine performs selective reception.  (See
page 99)

2

Valid

47

REMOTE RECEPTION

1

Invalid

Selecting whether or not the machine accepts remote reception 
command.  (See page 63)

*2

Valid

52

DIAGNOSTIC

PASSWORD

(----)

Setting the password for Remote Diagnostic Mode.  Please ask 
your Panasonic Authorized Dealer for details.

53

SUB-ADDRESS 

PASSWORD

(----)

Setting a 20-digit password for secured sub-address 
communication.

Continued on the next page.