Panasonic WJ-HD316 User Manual

98

Perform the settings for event actions of each event type
(motion detection, video loss, command alarm and terminal
alarm).

q

Perform the settings for the alarm output duration and
the buzzer sound duration for each event type (motion
detection, video loss, command alarm and terminal
alarm).

The following are available for the alarm output dura-
tion.
When OFF is selected, the alarm output will not be sup-
plied.
(s: second, m: minute)
OFF: No alarm output is supplied.

1 s - 30 s (in 1 second intervals)
/40 s/50 s/1 m/2 m/3 m/4 m/5 m

EXT: Alarm output will continue until the ALARM RESET

button is pressed.

The alarm output duration cannot be set for video loss.
Signals will be supplied continuously from the camera
error output terminal (pin no. 17) of the ALARM/CON-
TROL connector on the rear panel during the period
when the video signal is lost. (Refer to page 81.)

The following are available for the buzzer sound dura-
tion.
When OFF is selected, a buzzer will not sound.
(s: second, m: minute)
OFF: The buzzer will not sound.

1 s - 30 s (in 1 second intervals)
/40 s/50 s/1 m/2 m/3 m/4 m/5 m

EXT: The buzzer will continue until the ALARM RESET

button is pressed.

w

Select ON or OFF to determine whether to enable or
disable the motion detection function for each camera
channel.
When ON is selected, perform the settings for the auto
motion detection area for each camera channel. Up to 4
areas can be set for a camera channel for the detection
area. Refer to page 44 for further information about the
auto motion detection function.

Start operation from the camera channel selection menu of
the "VMD Setup" window.

■ [Event] Function for Events

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■