Panasonic ty-tp50p6s User Manual
23
Setup program
The setup program is to set communication ports and various operation modes and to carry out calibration or so on.
Performing setup in the initial state saves the modified contents in “tpdrv.ini” setting file in “C:\Program Files\tpdrv”
folder. Those contents are still valid at the time of the next startup.
Performing setup in the initial state saves the modified contents in “tpdrv.ini” setting file in “C:\Program Files\tpdrv”
folder. Those contents are still valid at the time of the next startup.
Pressing any button displays the setting window
relative to that item to permit changes in set values.
Changes to each item are reflected to the driver
software in operation when closing the window.
Pressing the [Close] button after completion of all
settings records all set values in “tpdrv.ini”.
relative to that item to permit changes in set values.
Changes to each item are reflected to the driver
software in operation when closing the window.
Pressing the [Close] button after completion of all
settings records all set values in “tpdrv.ini”.
Setup of a basic Screen
(see page 24)
Calibration Screen
Target is displayed in the order of upper
left, buttom left and upper right. And
calibration is completed.
left, buttom left and upper right. And
calibration is completed.
Cursor Position Fine Adjustment
As the result of carrying out calibration, the mouse
cursor appears at the touched position normally.
If the cursor position is off slightly for some reason,
use these buttons.
cursor appears at the touched position normally.
If the cursor position is off slightly for some reason,
use these buttons.
User Setting
Touch a target
(Press any key for cancellation.)
Adds a Setup Program short
cut onto the task bar.
cut onto the task bar.
(see page 26)
(see page 27)