Panasonic ty-sp37p5k User Manual

3

English

• Adjust so that there is a uniform clearance

between the Wide Plasma Display and the
speakers, and then securely tighten the bracket
mounting screws.

• Secure the top and bottom mounting brackets by

tightening the bracket mounting screws.

• Secure the left speaker in the same way.

4. Secure the speakers in

place.

• Insert the hooks on the top and bottom mounting

brackets simultaneously into the slots at the rear
of the Wide Plasma Display, and then lower the
speaker into place.

• Attach the left speaker in the same way.

3. Attach the speakers to the

Wide Plasma Display.

Bracket mounting 
screw

Rear of Wide Plasma Display

Hook

Rear of Wide Plasma Display

Slot

Slot

1. Push down the lever.

2. Insert 
    the cable.

3. Return the lever to 
    its normal position.

1. Press down on the lever.

2. Insert 
    the cable.

3. Release the lever.

1. Push down the lever.

3. Return the lever to its
    normal position.

2. Insert 
    the cable.

• After preparing the ends of the speaker cables, connect them as shown.
• Connect the speaker cable for the left speaker in the same way.
• The red cable is for the (+) side and the black cable is for the (-) side. Do not connect the cables to the wrong sides.

5. Connect the speaker cables.

Preparing the ends of the 
speaker cables

While twisting

1. If connecting to an external amplifier which exceeds the

rated input for the speakers, lower the amplifier volume to
protect the speakers from damage. If any problems occur
with speaker operation, disconnect the mains lead of the
amplifier and consult a qualified service technician.

2. Do not place the speakers in the following places:

• Places which are exposed to direct sunlight
• Near heaters or other heat sources
• Places with high humidity

3. This set is equipped with magnetic resistant speakers but

be careful not to place them near the CRT TV as it may
cause color patches.

4. To clean the speakers, wipe them with a soft cloth. If they

are extremely dirty, wipe them with a cloth which has been
soaked in a small amount of household detergent, and then
wipe the dry with a separate cloth.

• Do not use solvents such as alcohol or thinner.
• If using chemically-treated cloths, follow the instructions

on the cloth packaging.

Notes on use